Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Alpine Terminator


User Tag List

+ Reply to Thread
Results 1 to 15 of 57
Like Tree113Likes

Thread: Custom build ideas

Hybrid View

  1. #1
    Ex stick thrower madjon_'s Avatar
    Join Date
    Dec 2011
    Location
    Richmond. Tasman.and Oz
    Posts
    3,505
    Deet melts anything!
    xtightg likes this.
    Real guns start with the number 3 or bigger and make two holes, one in and one out

  2. #2
    Banned
    Join Date
    Dec 2017
    Location
    The New Progressive non binary Socialist Dystopian Republic
    Posts
    758
    I use a Browning Mountain Ti with currently a Swarovski Z8i 1.7-13.3x42 in 7 mm WSM.
    Just over 6.5 lb good to go.
    140 gr Nosler AccuBond home load doing 3200 fps almost in the same hole 3 shots at 100 yards.
    Used it on the range out to 700 yards out shoots me checking the bullet drop but would not recommend it as a range rifle as the barrel gets rather warm no issue for my hunting.

    Issues in the last 9 years.
    Damaged crown smashed the muzzle on a rock jumping about on the tops, purchased a re-crowning kit shoots like new again.
    Trigger was a bit heavy even when adjusted replaced the trigger return spring with a section of spring from a pen instant 2 lb crisp trigger 8 years ago.
    Bolted the rifle to a Nightforce NXS felt like the scope doubled the weight and bulk of the set up.
    Soft touch camo stock finish melts if you have Deet on your hands.

    Great rifle easy trigger fix no plans to change.

    Still has 1000 ft-lb energy at 900 yards.

  3. #3
    Wadiyatalkinabeet Ryan_Songhurst's Avatar
    Join Date
    Sep 2015
    Location
    South Island
    Posts
    10,686
    Quote Originally Posted by xtightg View Post
    I use a Browning Mountain Ti with currently a Swarovski Z8i 1.7-13.3x42 in 7 mm WSM.
    Just over 6.5 lb good to go.
    140 gr Nosler AccuBond home load doing 3200 fps almost in the same hole 3 shots at 100 yards.
    Used it on the range out to 700 yards out shoots me checking the bullet drop but would not recommend it as a range rifle as the barrel gets rather warm no issue for my hunting.

    Issues in the last 9 years.
    Damaged crown smashed the muzzle on a rock jumping about on the tops, purchased a re-crowning kit shoots like new again.
    Trigger was a bit heavy even when adjusted replaced the trigger return spring with a section of spring from a pen instant 2 lb crisp trigger 8 years ago.
    Bolted the rifle to a Nightforce NXS felt like the scope doubled the weight and bulk of the set up.
    Soft touch camo stock finish melts if you have Deet on your hands.

    Great rifle easy trigger fix no plans to change.

    Still has 1000 ft-lb energy at 900 yards.
    so does a "lowly" 270win pushing a 150LRAB @2900...
    veitnamcam and xtightg like this.
    Flappy Disc Customs Bespoke Hunting Rifles

  4. #4
    Banned
    Join Date
    Dec 2017
    Location
    The New Progressive non binary Socialist Dystopian Republic
    Posts
    758
    Quote Originally Posted by Ryan_Songhurst View Post
    so does a "lowly" 270win pushing a 150LRAB @2900...
    Nothing lowly about a 270 though it would be a long action and probably not weigh 6.5 lb good to go with a scope, still a great calibre the 270

    My DTA 338 Lapua / S&B with ASE UTRA SL7 has 1000 ft-lb at 1600 yards but I would not carry it up top either without a small pony as gun bearer .

    The original post was for a discussion in relation to a light weight 7 mm, cost vs weight I have not seen a better factory set up than the Browning Mountain Ti, what would a custom build bring other than more cost and delays? (what would a custom Titanium receiver and light weight composite bolt cost these days)

    Just my humble opinion
    Last edited by xtightg; 06-03-2018 at 10:37 PM.

 

 

Similar Threads

  1. Replies: 16
    Last Post: 14-12-2017, 12:46 AM
  2. Custom .260 Build
    By SlimySquirrel in forum Firearms, Optics and Accessories
    Replies: 34
    Last Post: 02-07-2015, 10:54 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!