Thread: CZ 527 Mauser Feed Issues.

So it jams at this point.

So I think there are a few problems.

1. The lips are leaving scratches on the cases and needs a polish

2. The rim isn't feeding into the mauser action and because of this the round is pointing to high and not feeding into the chamber. This is as per the photo.

3. Loading by pushing the centre of the bolt home tends to result in a cleaner action. Using the bolt handle tends to make it bind early on in cycling process.

Also note; rounds 4&5 tend to bind up more potentially due to less spring pressure forcing the rim into the clip.

Sent from my SM-G780G using Tapatalk