Thread: CZ527 barrel onto a Sako A1 or Remington 700

The Remington barrel is 1-1/6"x16tpi so the 25mm cz barrels dont have enough diameter without making a bush which is lot of faffing about and added cost to the cheap barrel.
The Sako small actions are 22mm x 16TPI so the 25mm cz barrels can be turned down and re-threaded to fit but is best done in such a way that you dont have to rechamber as the hammer forged cz barrels are super hard so cut and ream like crap. No problems bumping the chamber forward to get the headspace needed but avoid changing the cartridge from .223rem.