Hi all, I bought a Howa 1500 308 over the weekend and its threaded for a suppressor but I don't know which sort. The guy bought it from Palmerston North Hunting and Fishing about 6 months ago . Any ideas ho tow figure out what would fit?
Hi all, I bought a Howa 1500 308 over the weekend and its threaded for a suppressor but I don't know which sort. The guy bought it from Palmerston North Hunting and Fishing about 6 months ago . Any ideas ho tow figure out what would fit?
Would this be right? It's out of the latest h&f catalogue
In case you can't read it1/2"unfx20
I'm not sure if this is a 1500 or not
Rule 5: Check your firing zone
raumati01
For a Metric thread measure the outside diameter of the threads.
Then measure the pitch from top of one thread to top of next.
i.e. a M8x1.0 thread will be 8mm in diameter and 1mm from one thread top to the next.
Or maybe it's an Imperial thread then measure the outside diameter and count threads per inch.
i.e. .3/8 x16unc = 3/8ths of and inch in diameter by 16 threads per inch.
THREAD IDENTIFICATION CHART
or take it into an engineering shop and ask them to identify it for you.
Cheers
Pete
Thanks for your help guys, I don't know much about sonics suppressors but the scope that combo comes with is pretty average . I was hoping to fit a Gunworks, I might go with the engineering shop option to be 100% sure.
Howa factory thread is 1/2-20
Bookmarks