fluting shot in barrels

Anyone had any detrimental effects???
Im talking a barrel that has close to 200 rounds through it!!!

I dunno, why dont you try it and write up a report?

I allways think that Ill send my TF barrel back to gunworks to get fluted, but Im allways too poor. and right now It works well, last time I mucked around with that rifle I had to get a new barrel put on. so Im alittle aprehensive

Right on bill.... Im aprehensive towards touching something shhoting as well as this.... Its shooting 0.2mil groups or less right out to ovet a km when I do my bit....
So fluting against a barrel heavy imbalance is a risk in one respect!!!

oh in that case its gaurenteed to go wrong. murphy is a cunt.

my sako 75 shot .5inches at 100m with winchester factory. shorten and suppress it and it wouldnt shoot less than the size of an A4 piece of paper at 100.

oh did I cry

I had Grant at trueflite do this one, Truelite 1:9 twist that had 400 rounds through it before getting fluting done. It still shoots 0.5MOA all day long, so no issues there.

http://i964.photobucket.com/albums/a...1332043775.jpg
Before



http://i964.photobucket.com/albums/a...on/rifle-1.jpg
After

kj

i am getting my tikka m695 fluted its allready had a few hundred rounds down it

It didn't effect this one, my 1st 7mm 375 Ruger ex factory SPSS 7mmRem mag with quite a few rounds through it before it was rechambered.

http://i1004.photobucket.com/albums/...375SPSS008.jpg

http://i1004.photobucket.com/albums/...375SPSS003.jpg

http://i1004.photobucket.com/albums/...er280AI005.jpg

I have never experienced a problem myself but have heard that you can. But I can understand your worry. Do it Adam, you know ya want too :D

I look at it this way. My factory barrel will shoot good enough for now
If it makes it shoot worse then thats the excuse i need to get a aftermarket barrel.

This barrels an ultramatch ah 199 not a factory.....

Meh im doin it big deep 8mm bastards ova top of grants "flu"s.... Sorry grant!!!