Thread: Getting Ar15 adjustable gas block from US

Hi guys. Going to put a DPT on my Ar. Looking to get an adjustable gas block so I don't have lots of gas back like i did in my last suppressed AR.
Looking at a Syrac low profile block for $99 at brownells.
Was wondering if this will be a simple task with the whole ITAR crap?, read somewhere items must be less than $100us then their is a one off $49 fee, is inspected my govt before shipping etc etc etc. Is this the case?
Alternatively I have a mate over there I could send it to then he resend it on to me.

Henry

Syrac wasn't approved for export last time I checked.

Sent from my XT535

Syrac is no go as above. $100 is the limit before you need to fill out paperwork for the dept of state. No other fees. JP and PRI blocks are good to go.

Are adjustable gas blocks needed for suppressed AR goodness?
Suppression is on my to-do list.

Not needed but help. where do you go to find what brands/ products are able to be exported?

Just go to gunworks and Robbie will put an adjustable screw in your gas block which does the same thing, had mine done for $30

..

Originally Posted by mcche171

Not needed but help. where do you go to find what brands/ products are able to be exported?

https://docs.google.com/spreadsheet/...aY3dzcUE#gid=0

That sounds a lot easier. Does the position of the screw shift with firing?

Not that I have found,I loctited my first two but my latest one (jp low profile) I never got around to it-nearly 2000 rounds later and it's still staying put

Res do you have a proper gas block or one that robbie has put together?

Originally Posted by mcche171

Res do you have a proper gas block or one that robbie has put together?

I have both, but the one I was talking about is a JP brand unit from brownalls

http://www.brownells.com/rifle-parts...%20ENTERPRISES

You can't go past JP stuff, bloody good kit. How do you find the one Robbie put together?

Works fine,it fixed the issue of over gassing that came about when he fitted a can about ten years ago. He adjusted it the and I have never touched it since. That said i have not used that upper much in the last few years and I'm guessing it's only seem 700ish rounds. I should sell it but I won't

Might have to give Robbie a call tomorrow.