Thread: Gun Porn, show off your new toys

Originally Posted by NIMROD

Wow..... tell me more

Thinking vx3hd dedicated bush gun as I’m doing a lot more bush hunting the past year with a young family it’s easier than multi day tops missions 150 noslers kaimai suppressor 8 twist 16” 7mm08 will come up nicely

I have just put a 1x scope on my bush rifle and am loving the ease with which you can shoot quickly both eyes open.

Originally Posted by southernman

Had a case for a while, rain day so cut slots with a hot screwdriver, not very well,(stock and barrel without sights) bought a electric soldering gun with hot knife for the tip, did a better job on the scope and upper barrel, but runs too cold and difficult to keep going, might get another foam and try again sometime.
But K95 with 3 barrels and 3 scopes.
Attachment 247334

I have found an electric knife does a nice job.

Originally Posted by Kelton

Thinking vx3hd dedicated bush gun as I’m doing a lot more bush hunting the past year with a young family it’s easier than multi day tops missions 150 noslers kaimai suppressor 8 twist 16” 7mm08 will come up nicely

You will enjoy that immensely

Just popped my registration cherry, also happens to be my first brand new rifle ever.

Kimber in 280 ai.? Nice

Originally Posted by Friwi

Kimber in 280 ai.? Nice

I'll be bringing it in for a trim and thread, just wanting to put a few rounds through first.

Originally Posted by Kelton

Thinking vx3hd dedicated bush gun as I’m doing a lot more bush hunting the past year with a young family it’s easier than multi day tops missions 150 noslers kaimai suppressor 8 twist 16” 7mm08 will come up nicely

And the deer will still be in grave danger if you do take it on "multi day tops missions" as well

New build has begun.

Pierce tiskele action, lonepeak 44 stock, 20inch proof csrbon barrel, trigger tech diamond trigger hawkins Featherlite rings. Will buy a oceanic defense suppressor, aswell as a march scope. Currently as it dsit is 2.5kg pre gunsmithing. Will be chambered in 6.5 saum.

Thanks cam from alpine, jaco from tusker and Matt @MTNGear!

Picked this up recently, nice old tikka m690 in 270. $500 from the second hand section of one of the locals. And a quick $150 for a suppressor off this site and it presents very well, have sorted it for my mates first rifle and was tempted to keep it for myself. Has a weaver 3-9 on it that was most likely put on it new.

Picked up this a little while ago, Tikka Strata .223 Nightforce NX8 2.5-20x50, Backlanz carbon bipod, gunworks maximus suppressor - shooting 73gr ELD-M's have shot paper out to 600 with very good results.

My latest build, got sick of lugging the light but very long Waypoint 6.5prc through thick bush so finally got round to completing a project I'd hand in mind (and safe) for the last couple of years. I wanted something short and light, didn't cost an arm and a leg, but allowed the use of my OD suppressor which did. Meant I was stuck with an HBAR profile being mandatory, so what started as a Howa 1500 .308 20" Blued HBAR became this. A 14" fluted and painted bush pig. The barrel chop, threading/re-crown, and fluting work was done by DPT. Cerakote was outsourced by GC. I am very happy with the work from both, and the end result is a well balanced rifle. The suppressor is an OD Alpine Hunter Magnum, the optic is a Leupold VX-3HD 1.5-5x20 FireDot Twilight Hunter. Cerakote colour code is H-264 for barrel and action (both rifles), C-110 for the bolt on the Howa.

My Kimber Adirondack in 308 with a 17” barrel. I did have a Swaro z3 3-10 on which topped it off nicely as a bush rifle but recently put the Zeiss hd5 3-15x42 on as I’m planning on doing some more open country aswell soon. Gave the rifle a birthday couple weeks ago and painted the stock how I’ve always wanted it to look and very happy with how it turned out, the paint job survived its first damp clements bush bash which is good.

Great paint job

After what seemed an eternity (3 weeks) my 300 prc bergara turned up today courtesy of forum gc's
Precision platform stock with L.O.P spacers, Timmney trigger, DPT mk2 suppressor with braked cap, wheeler cant bubble rings, niggaloh qr stud sling, sitting on my javelin bipod.
Can't wait for range testing on Sunday with 225gn eldm hand loads.