That's fantastic.Quote:
Originally Posted by GWH
I love to see craftsmanship and quality engineering like that.
Printable View
That's fantastic.Quote:
Originally Posted by GWH
I love to see craftsmanship and quality engineering like that.
@vietnamcam sort that for you?Quote:
Originally Posted by GWH
Nah, wanted it done straight away, so hooked a couple of car batteries together with jumper leads and used an old arc rod I had in the bottom of the toolbox, seemed to do the job okQuote:
Originally Posted by MSL
Sent from my SM-G900I using Tapatalk
I recall Toby considering something like this at some point.Quote:
Originally Posted by GWH
Sent from my SM-G900F using Tapatalk
Do you make a tactical version
The tactical version is the same, you just colour it black with a sharpie and a picatinny rail is welded on the side of the scope....to mount tactical shitQuote:
Originally Posted by northdude
Cool someone finally made a mount for a mini14 that only moves in 2 directions :)Quote:
Originally Posted by GWH
Yeah that's exactly it, however I seem to have an issue with blowing holes in the scope tube when welding on the picatinny rail. Bit of duck tape over the holes should keep the water out tho.Quote:
Originally Posted by Spudattack
Doesn't the paratrooper model have the back of the stock cut off at the pistol grip and a brass hinge and latch screwed on to make it folding?Quote:
Originally Posted by GWH
I may have a position for you, you can be the 'ideas' man, and I'll continue with the quality craftmanship.Quote:
Originally Posted by Spudattack
We won't need to worry about a marketing guy, as it's fair to say that high class work like this will sell its self.
Sent from my SM-G900I using Tapatalk
Frankly I am surprised we haven't had military orders streaming in yet, i suppose it is the weekend though, better take your phone off the hook come Monday though, not sure our production capabilities will keep up....
Sent from my SM-G360G using Tapatalk
I think I threw up in my mouth a little..... no wait.... it was a lot and it wasn't just in ky mouth.Quote:
Originally Posted by GWH
Perfect for those elevated shots GWH:D
Looks just the ticket but I fear you may need to "upgrade" the optics ehQuote:
Originally Posted by GWH
Why have you got KY in your mouth?Quote:
Originally Posted by Miami_JBT
If you use some duct tape to hold a torch on you'll have night vision.Quote:
Originally Posted by GWH
Better to have KY in my mouth than have that rifle.Quote:
Originally Posted by Steve123
I dunno, it now has night vision.Quote:
Originally Posted by Miami_JBT
Whiskey, Tango, fukn Foxtrot........:sick:Quote:
Originally Posted by GWH
He has an amazing cheek weld Scouser. Ha ha ha ha
:sick: did you manage to build in 20moa for the longer shots? I 'm sure you would have worked it out OK with your tape measure.Quote:
Originally Posted by GWH
Looks about 60moa so he should be good
If you find you max out on elevation before 1000yrds turn your ammo 45 degrees anti clockwise before chambering ...................your spin drift then becomes elevation and you won't have to dial as far
I was going to suggest welding a teaspoon in front of the barrel to kick the bullet up just as it left the muzzle but you idea is so much better.Quote:
Originally Posted by 7mmsaum
That rifle be no good to me I would need to stand on a ladder to look through the scope.:D
That's alright, just use the same one you use to get onto your quad bike..Quote:
Originally Posted by Dundee
Yeah I built in about 40 moa cant as after seeing the lads shoot 1800 yards at the Toby shoot I'm keen to do that eh.Quote:
Originally Posted by 300CALMAN
Didn't use a tape measure tho, I got fancy and used my old protractor from my high school tech drawing class.
That might be stretching the old 303 tho, so after seeing kiwigreg post that 26 Nosler brass I'm now keen to ream the old military barrel out to suit 303/26 Nosler, then I'll look at brazing two 150 bullets together base to base to make a double pointy ended 300g 303 long range bullet.
Thanks for all the other excellent suggestions, this forum really is a wealth of information.
Now why didn't I think of that, awesome tip!Quote:
Originally Posted by 7mmsaum
No problem. If you want help with welding the car headlight to the barrel we are good at that too. Not to mention a fence post tripod and coke can suppressor and you will be No 8 tacti-cool. Also don't forget the BBQ paint crap-coat paint job.Quote:
Originally Posted by GWH
All great ideas, I may need to add some dolly wheels to the old girl by the time we're finished hereQuote:
Originally Posted by 300CALMAN
Sent from my SM-G900I using Tapatalk
new for this week sako 85 223 1 in 8 twist http://uploads.tapatalk-cdn.com/2016...3df734ddc9.jpghttp://uploads.tapatalk-cdn.com/2016...fb26f0b8ad.jpg
Very nice!Quote:
Originally Posted by buzzman
Sent from my SM-G900F using Tapatalk
Shit that's nice Buzz, too early to put dibs on it?
Bugger ya, you beat me to it ;)Quote:
Originally Posted by Ryan_Songhurst
Never to earlyQuote:
Originally Posted by Ryan_Songhurst
na was guna put first dibs get in fast [emoji6]Quote:
Originally Posted by Ryan_Songhurst
Dibs
My new toy!!!
Attachment 58274
A case from a gay McDonalds?Quote:
Originally Posted by PERRISCICABA
Lol! You would "LOVE" a mcdonald like it.Quote:
Originally Posted by Rushy
Yes, i am changing my "diet"…
