Someone is going to enjoy that. ROUTER for the barrelQuote:
Originally Posted by Dan
Printable View
Someone is going to enjoy that. ROUTER for the barrelQuote:
Originally Posted by Dan
Why 'wood' you? too heavy?Quote:
Originally Posted by Dan
Haha cheers Rushy, good plan. I was gonna try with the dremel.
Yeah needs to be lightened, and to help with cooling and harmonics and stuff haha. Nah, it's just that the real ones are fluted, I think
.............Terrible, just terrible :huh:Quote:
Originally Posted by Scouser
Heres my new toy, had her out to the range for her first few rounds today, and i must say, ...hahahaha awesome! love it.
was quite a long wait, but well worth it. (not that long really, but all waiting sux haha)
problem is, now the wife wants one too!
NEA-15 DMR 18 in E-cat with Mueller Speedshot and Timney trigger
Attachment 8890
Very nice Haydendev
Here is my Deer/Goat gun - well I hope it will be :)
Tikka T3 Lite 7mm08 with gunworks suppressor and Leupold v3 cds 3.5-10x50 scope.
Attachment 8952
I hope it goes well for me :)
Can't see why it wont go well for you, goes well for the rest of the country. Gotta get out there and blood it.
The empty cases can't escape?! :PQuote:
Originally Posted by Kumoe
And no bolt? Ha HaQuote:
Originally Posted by Nibblet
Um, left handed rifle...
Sent from my HTC One X using Tapatalk 2
Giving you shit mate.
I am the dumbass. Oh noes :o
Sent from my HTC One X using Tapatalk 2
Phew! Was worried you were runnig so much powder you were just vapourising the brass! :thumbsup:Quote:
Originally Posted by Kumoe
Nice gat dude....... buy the 22lr
nice rig their, haydendev. my nea-15 dmr also runs a timney, with the samson evo 10'' handguards, currently in A cat format. hows the groups at 100m ive had good results with fiocchi 69grain loads, sierra matchking loads.
AB Percision titanium action
Ptg bolt fluted
Alloy firing pin assembly
X-treme titanium recoil lug
Bartlein, 1.9, #3, 27" fluted barrel
Talley rings lapped an pinned to action
Jewel trigger
McMillan hunters edge stock. . . Lightened
AB Percision shark attack brake
Fitted with Mk4 6.5-20x50 at moment till cds arrive for the vx6.
Fires the 180gr berger hybrids at 3310fps an shoots well. . .
And a huge 3.28kg as shown on 7lbs 4oz
http://i765.photobucket.com/albums/x...ps64dd101f.jpg
http://i765.photobucket.com/albums/x...ps41ff9718.jpg
http://i765.photobucket.com/albums/x...ps64f6b03e.jpg
http://i765.photobucket.com/albums/x...ps4f3b9b71.jpg
hey ive seen this before:ORLY:
Fark Abe that is mint mate :cool:
Quote:
Originally Posted by Dreamer
+1
Can't wait to get something built by him once I'm back home.
Jeese TM, if i tried to sell my 'ringpiece' i still would not be able to get one of those!.....any takers on an advance?
havent done much testing so far, got about 1.3 inch 5 rounds group with hornady 55gr #2266 at 100m.Quote:
Originally Posted by foxhound
had a few barnaul 55gr and 62gr projs, to try to see if i could get away with some super cheap ones, and they were getting about 3.5-4.5inch, haha, so will stick with the hornadys in the mean time and do some more load development, see if i can get any smaller, and will try some heavier projectiles when i can get my hands on some, and some time to do some more testing.
gun will mainly be 3gun rifle, so the cheaper the better as will have plenty put thru it, but certainly would like better than 4 moa accuracy would be preferable haha
Attachment 9032
She is a bit of a beast at the moment and I have a lot of work to do to get her shooting again but hopefully she will turn into a classy medium bore once again.
Anybody with some 9.5x57 brass or components or advice, please get in touch.
This has been up and running for a while now. I was going to hold off from photos until I painted the stock, which I still haven't done but will at some point. Does anyone know of a good textured paint for a stock? Big thanks to Abe for the barrel fitting, chambering and suppressor and to Leathel for help with bedding and use of his mill for the stock inletting.
Specs are:
Howa Short action
MAB 1:8 22" #5 .260 REM
Hi-Tech Specialties Stock
Sightron SIII 3.5-10 Mil/Mil
EGW 20MOA base and Leupold QRW 30mm Low rings
Bipod is VersaPod copy and Vektor Maskin spigot
Tui_man Suppressor
Attachment 9103
Very nice!
Sent from my iPhone using Tapatalk. So please forgive my sausage fingers!!!
Looking Good
looks great Normie,dont paint the stock it looks good how it is.
100mm grinder with a sanding disk, only solutionQuote:
Originally Posted by Dan
Scatter gun?
http://iforce.co.nz/i/o4ors3hn.ch4.jpg
Iz that the new defender?
Sent from my GT-I9300 using Tapatalk 2
Remington 870 Tactical with a cheap side sadle for shell holder. Plan is to adda police spec trigger, upgrade the ejectors if I need to, add some sort of sight, and shoot a fuck ton of slugs, and shit through it. Might get a second longer barrel for foul, or clays if Ic an be arsed.Quote:
Originally Posted by CreepingDeath
Come on bro give us the spiel.
Sent from my GT-I9300 using Tapatalk 2
RRA LAR8 that's had handguard slotted and reanodised, Timney trigger and brake fitted.
I don't rate RRA Ar15s personally but the big boys arnt generic mil spec stuff. All propriety thus very different in build quality.
Takes SLR mags which is the reason I went with it as opposed to DPMS, REM, CMMG etc which all interchange parts wise, but arse for mags and ESP big mags.
Lose parts availability for mag availability which is acceptable to me in this case.
Will try and get another upper and bolt and will build a 7SAUM upper also.
I want one sooo bad. Whats the weight. Anything you can do to get them skinny? Obviously lose ten inches of barrel but anything else?
Sent from my GT-I9300 using Tapatalk 2
Nice one there Spanners, here goes a few of NEA 14.5 with custom handguard and waitaki can fitted as of just then. pretty wrapped with how guard came up, just what I was after. Gave the trigger a lick over too havnt put the scales on it but its lost about ten tonnes and a heap of creep and graunching so im excited to get it out tomorrow!!Attachment 9148Attachment 9150Attachment 9151Attachment 9152Attachment 9153
I'll weigh it tomorrowQuote:
Originally Posted by CreepingDeath
20" barrel - I think it isn't that heavy.
Barrel profile is pretty nice
Who did you use to do anodising?Quote:
Originally Posted by Spanners
Someone else had it doneQuote:
Originally Posted by Tahr-Bound
Spanners, why oh why is the a anti-social boom box on the front of that barrel :P
I think I might get a louder one so I can blast more and spray those around me with hot brass betterQuote:
Originally Posted by ebf
