Probably cant get it much lower even though it's only 44mm objective the AO is quite bulky.Quote:
Originally Posted by 223nut
Could possibly go 5mm I'll have a look when it's out of the safe next, I do like to keep em as low as possible.
Printable View
Probably cant get it much lower even though it's only 44mm objective the AO is quite bulky.Quote:
Originally Posted by 223nut
Could possibly go 5mm I'll have a look when it's out of the safe next, I do like to keep em as low as possible.
They are mean little weapons those marlins. Miss my 980s, should never have sold it. Outshot much more expensive 22s on the regular.Quote:
Originally Posted by dannyb
If it has a trigger less than about 8 lbs then it's likely had a trigger job or spring set. You can tune em yourself with a ball point pen spring and a little piece of nail
Sent from my CLT-L09 using Tapatalk
It's definitely not 8lbs, I'll have a nosey when the new stock arrivesQuote:
Originally Posted by Nick-D
Here is my new toy.
Tikka T3x superlite 308
Fluted barrel shortened to 16inches
DPT Suppressor
Carbon fibre stock and bipod
Fluted bolt and carbon handle
All up scoped with bolt, mag, bipod and sling weighing just on 6.5lbs.
And it shoots well. 3 shots touching at 50mtrs
Attachment 115036
Attachment 115037
What carbon bolt knob did you use ?Quote:
Originally Posted by Curtis27
Any chance of a pic of the bolt ?
Ive got a kind of similar Tikka 6.5x55 that is waiting for me to pick up from Kiwi Greg , but I won’t be back in NZ until September and the wait is killing me .
Im envious that you have yours already to play with .
Hey the bolt knob was one the gunsmith organized for me but think it is Tactical Works.
Thanks
A 300 RUM; all pretty much standard apart from the stug stock.
Not quite as fast as the one above. 210 Bergers doing 2965 shot the best.
Attachment 115296
Tikka 300wsm,20inch barrel,Southfort stock,VX5,SSRNZ can.My all rounder gun.Shoots .3 inch groups all day.Attachment 115769Attachment 115770
O what a little honey like lots
Sent from my TA-1025 using Tapatalk
EWas that at night? Being .5 ;)Quote:
Originally Posted by Monk
Bahaha yeah that was measured from outside to outside.If measured from centre of holes it’s .3Quote:
Originally Posted by Gibo
Touche Gibo :)Quote:
Originally Posted by Monk
Tahr I think it is more like open mouth, insert foot, chew vigorously Gibo.Quote:
Originally Posted by Tahr
Finally got my lithgow .22lr almost to where I want it.
I changed the trigger spring but still not down to 2lbs so will have to get someone who actually knows what they are doing!
So have got it threaded for an over barrel Dan can and a custom bolt knob and trigger spring kit.
I nearly buggered up the nightforce custom rail as had been looking on line and people were talking 55moa rails so decided to run with that.
I had an 5x20 shv but couldn't get it zeroed any closer than 60 yds with subs as only had 90ish internal, I ended up putting an nxs 5.5x22 x50 with zero stop on top with a nf bubble level.
I now can get a 50 m zero with a bit underneath and just checked the internal elevation at 102 moa with 20 in the reticle.
Some would say overkill, I say I could!
A big shout out to nightforce Australia for a bloody nice job on the rail and their awesome scope!
Just zeroed it with some hornady 40g roundnose running at 1070 on the box so will be in for a validation session as reasonably pleased with the cheapish ammo's performance.
Looking forward to some great plinking fun!
https://uploads.tapatalk-cdn.com/201...72a46caeff.jpghttps://uploads.tapatalk-cdn.com/201...fd05a8fad3.jpg
Sent from my SM-G950F using Tapatalk
@Monk
Nice set up on the 300WSM . What projectile are you running? What speed are you getting out of the 20"?
Was thinking similar but was unsure on running 20".
Cheers.
178 eld-x with 62g of RL-17 getting 2840fps.Tack driverQuote:
Originally Posted by 284 Gypsy
Remington 700 build I did back in 2014 - Thought it deserves to be in the porn section before I sell it :thumbsup:
Attachment 116002
Attachment 116003
Definitley needs to be in here. Why the sale? What calibre is it?Quote:
Originally Posted by Sasquatch
Thanks, calibre is in .308 - Specs hereQuote:
Originally Posted by Curtis27
I'm in the process of reducing some of my collection, some of which I don't really have much of a choice now... But fear not, I have a couple of LR rigs similar to this that I will keep. I'll be sure to post them here.
My new 10-22 compiled over a few months buying part by part
Build as follows
Factory Receiver and bolt (don’t see any reason to upgrade ether of these parts)
Factory bolt handle and spring (will upgrade soon though)
Green mountain match barrel (24in) for now
Laminate stock (unsure of brand)
Kidd bolt buffer
Kidd trigger pins
Kidd 2 stage trigger set 8oz 1st stage 8oz 2nd stage
Weaver rail
Burris z rings
Nikon monarch 4-16x50
Attachment 116236
Nice man. I'm considering doing a similar build with the confiscation funds. Where did you source the barrel?Quote:
Originally Posted by rambo-6mmrem
Shot it yet?
Sent from my CLT-L09 using Tapatalk
Im pretty sure a cop would require a change of undies if he saw that. That would classed as one of those "evil" guns just because of its looks :thumbsup:Quote:
Originally Posted by Sasquatch
Got the barrel from Steve at burly armsQuote:
Originally Posted by Nick-D
He had plenty in stock probably still dose
I have shot the rifle with a factory trigger seems to be very accurate
Will be even better now I have the kidd trigger
Get the Kidd cocking lever and spring kit, these are excellent at tuning the action timing.Quote:
Originally Posted by rambo-6mmrem
why did you go for such a long barrel ?Quote:
Originally Posted by rambo-6mmrem
I think that's just what they stock hereQuote:
Originally Posted by gonetropo
Exactly what nick d saidQuote:
Originally Posted by gonetropo
He doesn’t have any shorter ones I’ll cut it down at some point
That’s already the plan just run out of cashQuote:
Originally Posted by Mathias
Worked out this morning I have $2300 in it including the scope
Didn’t feel that bad a part at a time over 6 or more months hahaha
Got this one back from the gunsmith a couple weeks back. Went out for it's first (unsuccessful but enjoyable nonetheless) hunt at the weekend.
Attachment 116570
CZ527, 20" Shillen SM chambered in 6.5 Grendel, DPT Can and a 2.5-10 NXS.
Hi all, first time poster. Here’s 2 of my babiesAttachment 116585Attachment 116583
@Mort123 - How'd you mod your bolt like that? Looks like a decent amount of weight taken out of it + fluting
Hey mate the guys at desert guns in Cromwell did all the work on the bolt
Gunworks also do them the sameQuote:
Originally Posted by hotsoup
The fluting yes, but not the rest at the moment according to their website
Right finally sorted my trigger guard for the Marlin in its new Boyds stock so as promised here are some new pics, still to sort a new more compact scope and some lower rings but it's getting there....
Attachment 116765
Attachment 116766
Attachment 116769Attachment 116770New barrel on me trebly. L461 .shoots like a bird.
Nice 461
@Friwi @Ryan_Songhurst - my bolt is actually currently with Gunworks being fluted, I called the lady yesterday and can confirm that they skeletonize the bolt handle too. (for my remington700) It's just not on the site.Quote:
Originally Posted by Friwi
What length barrel is that mate? Is that paint scheme a wrap or something? Looking at doing the same thing to a Tikka 308 I have lying around.Quote:
Originally Posted by Happy
