Stoeger M3K 28” barrel.
Lotsa competition bling comes standard. :XD:
Attachment 138996
Attachment 138997
Printable View
Stoeger M3K 28” barrel.
Lotsa competition bling comes standard. :XD:
Attachment 138996
Attachment 138997
So it was pointed out I have some new porn I haven't shared.
Here's my new to me Fierce Fury in 7mm rem mag.
Have to say I'm pretty impressed with the build quality and will be doing load development as soon as my Gunworks care package arrives next week.
I have some Sako factory ammo it loves, so will get out this arvo and put some on steel for shits and gigs.
Attachment 139144
Attachment 139145
Attachment 139147
Shit yeah man. Sick rigQuote:
Originally Posted by dannyb
Sent from my CLT-L09 using Tapatalk
Verrry nice
Nice, just needs a circumcisionQuote:
Originally Posted by dogmatix
She's a wet dream @dannyb
How did it shoot @dannyb ?
Shoots Sako factory 150gn powerheads at 1/4 moa that's gonna be a hard act to follow when I get my brass and projectiles next week to work up a 162gn eldm load, I think I will dabble in the 180gn eldm as well at some stage. Its silky smooth to cycle feeds and ejects flawlessly and the sako trigger is exactly what you would expect I've got it down to about 1.5lbs and it breaks like glass.Quote:
Originally Posted by Tahr
XM-3 clone, but in .223 instead of .308.
Based on Remington 700 223 Tactical as it had the correct barrel profile, just needed to be shortened 1.5" to 18.5".
McMillan stock, with Badger Ordnance 20moa rail, Badger front rail, Badger M5 DBM (not clone correct as they used internal magazine only), Custom Twin Needle clone correct stock pack, NF Ultralight low 30mm rings with NF 4-14 F1 SHV MilR scope (Clone correct scope is a NF NXS 3-15), Harris 6-9 bipod with pod-lok and ODL 30cal 2-port brake instead of the Surefire thing.
Attachment 139685
Attachment 139686
Attachment 139687
The XM-3 brought to you by the mad scientists at DARPA :thumbsup:
Great looking clone @grunzter
Real ones...
Attachment 139748
Attachment 139749
Attachment 139750
So I picked up a couple of rifles over the lockdown. This is the 1st and most versatile I'd say. Remington 300wsm, 22" dpt can and stug stock ,vx5 3-15 firedot. Shoots the vld 175 well too.
Attachment 139954
Attachment 139955
New to me sako 85 6.5x55 with a wood hunter stock fitted,thinking of putting a vx5 on it to make not so top heavy https://uploads.tapatalk-cdn.com/202...65abccefce.jpg
Sent from my SM-G960F using Tapatalk
Nice ringsQuote:
Originally Posted by buzzman
Sent from my CPH1903 using Tapatalk
[emoji23][emoji23][emoji23]Quote:
Originally Posted by 25 /08 IMP
Sent from my SM-G960F using Tapatalk
Sometimes it’s the small rifles that charm. I have a few Brnos and was scoping my model 5 yesterday. Forgot how nice these fit and feel. Nice stick of tiger stripe timber to boot.
The other photo is my Remington 541S. Just put a period Micro trac engraved Weaver scope on it with engraved Weaver rings. Matches nicely the engraving on the rifle itself.
Attachment 140043
Attachment 140044
Remington 541S
Attachment 140045
New ICBM launcher...
Attachment 140050
Attachment 140051
Attachment 140052
Is it a 6.5 of some sort :p
:P
You could probably seat a complete 6.5creed case and all and use it as a projectile lolQuote:
Originally Posted by northdude
Attachment 140097
Finally got one of these cute little model 7s everyone raves about.
7mm08. 18" barrel. Bought off a forum member.
Time to add some sling swivel studs, buy a suppressor, remove the cheek rest and flute the bolt. Then load development for 160gr TMKs :thumbsup:
Decided on a scope yet?Quote:
Originally Posted by Ryan_Songhurst
Not a crudmore case but the 378 cases from 223's might do !! Looks nice with no finger marks on it!Quote:
Originally Posted by Ryan_Songhurst
Making it lighter is a good idea as I know how much you carry it around!Quote:
Originally Posted by buzzman
Sent from my SM-G950F using Tapatalk
6.5 saum bartlein barrel 22" 1-8 twist manners carbon stock hawkins rings boone and crocket dpt can and quotromax brake . Great little banger accurate as slings the 156 eol berger at 3009fps 200 yrd zero then out to 780yrds bang on originally built for @The Claw by alpine precision this is my second rifle from cam and their bloody gold awsome calibreAttachment 140289Attachment 140290Attachment 140291Attachment 140295Attachment 140297
Actually love this little banger so much so i think iv finally found the chambering to built a full custom with
Goes pretty well huh? I'm really looking forward to its replacement being finished. Should be a good all round rig I'm thinking
Sent from my SM-N975F using Tapatalk
Goes brilliant just what i needed befor spending the $$$ on a custom im all for trying out the cals on a cheaper platform firstQuote:
Originally Posted by The Claw
I crack up at the fact that these rigs are seen as the cheap option!
Quote:
Originally Posted by Freezer
"Cheaper" its actually a bloody beauty i wont gain anymore performance nor accuracy out of a custom same barrel and chambering or 7 saum just to get the length down another couple inchs iv had many great rifles and sold em its a bad habbit of mine but its allowed me to try different cals to narrow down what best suits me so far so good with the short action magnum
I have waited 8 long lockdown weeks for this bad boy, still waiting on some custom leather work to complete it but had to post it up.
My first foray into the world of lever guns.
16.5" stainless 336 in 30-30 with a nikko diamond 1-4×24 #4 reticle with red dot mounted in contessa alloy rings.
Big massive props to @Tikka7mm08 and @MSL for getting it to me.
Can't wait to put some rounds through it.
Attachment 140414
Attachment 140415
Attachment 140416
Nice looking rifle.
Thats beyond awsome @dannyb wholey
Just been thru a round of redundancys at work....luckily kept my job.
So I thought what better way to celebrate than buying a new gun!!
Tikka T3x Superlite in 6.5x55.
Had a spare set of tikka rings and scope, so here it is good to go
Attachment 141815
Good choice. You know where I am if you need a hand sorting Loads.
����. Will do, have got a couple of boxes of ammo to start with.Quote:
Originally Posted by Ingrid 51
Big big thanks to @Apocalypticaman for getting this wee beauty in 44mag to me for the middle child to add to his Henry 22 and 1866 Uberti 45 Colt.https://uploads.tapatalk-cdn.com/202...382ca3273d.jpg
Sent from my SM-G986B using Tapatalk
Seeing this beauty has given me sellers remorse, had a stainless version I sold too cheap, fuckit.Quote:
Originally Posted by Tikka7mm08
I have a list as long as my arm of seller's regret.
I have one same model in .357Mag, great little gunQuote:
Originally Posted by Tikka7mm08
I'd like to get a 357 for him too. Don't think he'll let me take this one to Stewart Is.
