Wow 2.8 for a yellow bucket of 243 what’s that grey thing on top weigh ;):XD:
Printable View
Wow 2.8 for a yellow bucket of 243 what’s that grey thing on top weigh ;):XD:
Even the dogs looking the other way after that joke:wtfsmilie::D
What flavour is it @Ryan_Songhurst? Almost looks Mauser based?
Looks like @Dreamer skinny Kimber Montana
Sent from my SM-A530F using Tapatalk
Looks like a Kimber....Quote:
Originally Posted by Preacher
Never seen one in the flesh so wouldn't know. The safety and cocking piece are very mauserish
That joke deflated Bo's rugby ball.Quote:
Originally Posted by Sideshow
if it didnt have funky bolt handle it could easily be mistaken for a bog std Howa.....Quote:
Originally Posted by Preacher
Only half the weight ;)Quote:
Originally Posted by Micky Duck
There you go,fixeded it for ya :thumbsup:Quote:
Originally Posted by dannyb
Lol Bo looking for your gum boots to take a leak in:ORLY:
Hey turn your outside light off;)
Lee Speed in 303 Brit, made by Bonehill in the late 1800's I hope.
I had better order up a 215 grain mold and find some cases. Be a nice rifle to take hunting.
I know, it’s only an airgun, but a fun project to bring a tatty but solid German springer back to life. On to the next..
https://uploads.tapatalk-cdn.com/202...62d0005d1c.jpg
Little critters are toast now!!
Factory Hornady ammo is grouping 10mm at 100m for 5 rounds! Couldn’t be happier!
Attachment 211253
Let's see a full a pic of that weapon @JohnQT. Make sure you keep all your brass for me:thumbsup:
Haha no worries @charliehorse I might have one or two spare!
Attachment 211293
Attachment 211294
Very nice
Two 7PRC rifles with one more in the works
https://hosting.photobucket.com/imag...720&fit=bounds
26" Rem 700
https://hosting.photobucket.com/imag...720&fit=bounds
22" T3 Tikka
https://hosting.photobucket.com/imag...720&fit=bounds
Designed for a suppressor & up to 168 projectiles
https://hosting.photobucket.com/imag...720&fit=bounds
The remaining one is a 1-8 20" which I should have this week, the cartridge preforms pretty well & undoubtedly will be the next big thing :cool:
Will be very interested in the 20” performance with 180’s.Quote:
Originally Posted by Kiwi Greg
Mauser M12 in 308 topped with a 3-9x40 Zeiss Conquest MC with A4 reticle.
Not going to suppressor this one. Will be the general purpose rifle that does everything.
Attachment 211917
It took a long time to get this thing going right, but it's there, thanks to a few talented gunsmiths and engineers who have fabricated, fixed, and modified parts.
SSRNZ single shot. 28" Brux barrel chambered in 338 Edge. Topped with an Element Titan. T4 brake does a great job taming the recoil. 285gr ELD-M doing 2850.
Attachment 211957
Complete with mall ninja multicam tape for a bit of extra grip up front, and an LSA clone bipod mounted backwards to put the legs further forward and make the locking lever as hard to reach as possible.
https://uploads.tapatalk-cdn.com/202...c2b751a1b3.jpg
Pre 64 win 94 30-30.
All original, with all its bits and an immaculate bore. I foolishly sold one in 2020 to a forum member, and almost instantly regretted it. So now I’m good again.
https://uploads.tapatalk-cdn.com/202...999cb398f0.jpg
Crappy dark photo, but this one is an 1892 Winchester in 32-20, tidiest one I’ve seen. Was offered this one also but not my thing.
Sent from my iPhone using Tapatalk
How do you tell they are pre 64?Quote:
Originally Posted by MSL
You can date them based on Serial number. To my knowledge no design changes post 64. Build quality/finish change only I believe but not 100% certain.Quote:
Originally Posted by Tahr
Sent from my iPhone using Tapatalk
Serial number. But also, the internal parts are machined rather than stamped sheet or cast. And the sights are a bit more refined.
Sent from my iPhone using Tapatalk
that .32/20 is a lovely rifle..would be a pleasure to own something like that..I know just the place to use it too..NO I do not have funds to purchase it.
A couple of examples from Austria.
Iv wanted an Ultralight for many years but by the time I could afford one they had stopped production and became hard to fine. This one in 222Rem in 9 twist performs flawlessly.
Attachment 212061
Iv had an HMR from very early on, starting with an anschutz 1517, moved to a Weihrauch HW60 for a grown up full sized rifle which was a far better and now to a Steyr zephry II. Full sized but a little lighter than the weihrauch.
Attachment 212063
I lusted after an ultralight in .308 for years also, but couldn’t find one, so moved on. Very classy rifle, as light as some carbon stocked rifles.Quote:
Originally Posted by sneeze
Sent from my iPhone using Tapatalk
They are pretty thin the ground. Funny thing, a few days after I picked this up Gun city listed one in 223.Quote:
Originally Posted by MSL
New to me via the Forum, a Bergara BA13 in 308 with a Burris Fullfield 2.5-10x42 currently sitting in shitty rings coz I broke the leupold ones while mounting the scope (doesnt know his own strength). DPT mini centrefire up front, to make a nice reliable and compact rifle for a quite short tall person.
Nothing fancy but I've wanted this setup for a while but the piggybank has been empty when the deals have come up.
The Forum has provided both items recently and Roktoy has his new toy.https://uploads.tapatalk-cdn.com/202...3b654fd2ab.jpg
Sent from my SM-G990E using Tapatalk
Nice. A good all rounder that will cover most situations. I have the same rifle in 300BLK.Quote:
Originally Posted by ROKTOY
New 6.5 PRC barrel for the R8, and an A-Tec H2 can with one module removed, and a brake cap fitted. Running 156 EOL’s.
Attachment 212488
I needed to do a bit of a barrel break in and zero the scope, so some best guess rounds off Quickload got me going.
Attachment 212491
Attachment 212493
I’m mulling over chopping it 2”.
We’re off to Dublin for Xmas / NY, so won’t be doing any more till we’re back.
B
I put a photo of this up a few pages ago in raw form
Ie incomplete
Was still running the millsurp stock and the barrel wasn’t blued
Left it with a mate a couple of months ago he makes stocks for fun but is a Very talented stock builder
He has built me a beautiful stock out of wallnut he managed to score when a tree fell down in a storm close to his house
Come back last night via the gunsmith who blued the barrel
So it’s a remington rolling block action genuine Remington too not a sweedish copy
Valcan 32” barrel 45-90
Custom stock made to measure for me shooting sitting on shooting sticks
Put a limbsaver on it (yes I know) not traditional but 45-90 with 540gn bullets is alot to tame
Even with a rifle that waighs about 16lb and im shooting 50 rounds in a day for matches
Attachment 212837
that is a thing of beauty...and the limbsaver=good on you.
Ready for safari :thumbsup:Quote:
Originally Posted by rambo-6mmrem
Thanks manQuote:
Originally Posted by Micky Duck
2 years getting parts together and another few months getting built
Bloody happy with it
It’s for qugley style shooting steel out to 1000 yardsQuote:
Originally Posted by Sideshow
Absolute sexy.Quote:
Originally Posted by Ryan_Songhurst
Hope you got a good sholder with that bad boy tank stopper.Quote:
Originally Posted by rambo-6mmrem
