The pic of the CZ back one page has the bipod on backwards, it is set so the legs fold back under the stock. It should be set so the lags go under the barrel.Quote:
Originally Posted by Tikka7mm08
Printable View
The pic of the CZ back one page has the bipod on backwards, it is set so the legs fold back under the stock. It should be set so the lags go under the barrel.Quote:
Originally Posted by Tikka7mm08
Ah, could've sworn I saw somebody suggesting it is the other way round too. Good to know.
Finally got the "bush stumpy" sorted.
Kimber Montana 7 08, Barrel shortened to 13" with Schultz'n'larsen hardcore suppressor, Talley rings & Leupy VXR 1.5-4 x 20 scope.
18" barrel in total & just over 6lb :cool:
Now to hopefully sort a load in the next couple of days. Chur
Attachment 39818
Attachment 39819
What's with the pig. The little fecker has followed you around for far too long.
He used the pig because he was to scared to post with a bipod attached... to avoid the embarrassment of being told he has it mounted backwards... but then, is the pig sitting backwards....?Quote:
Originally Posted by kiwijames
@kokako load development done, 300gr elite hunters cruising along at 2850.Quote:
Originally Posted by kokako
Accuracy is great, at 200 yards 4 shots touching, 6 inch gong at 1000 yards done[emoji41]
Recoil is brisk the factory brake is shit, but it's a hunting gun so will survive.
Might end up suppressed when funds allow.
The trigger is very nice now.
Vx6 4-24x52 with Tmoa recticle.
Attachment 39835
Attachment 39836
Attachment 39837
Attachment 39838
Attachment 39839
Attachment 39840
The holes are drilled facing forward !:wtfsmilie:
Yeah like those old vias ( unsure of spelling)Quote:
Originally Posted by veitnamcam
Brakes. The front ones go the other way so it's all a bit weird.
Quote:
Originally Posted by veitnamcam
Well it is a SAKO :D
One 338 I might actually own.
Mean bro, mean.....stink about the brake, piss it off.
B
http://i736.photobucket.com/albums/x...ps3bgwh96r.jpg
Potatocam of the 30-06 Vanguard in an MDT LSS.
I had to machine a slot in the action cutout behind the trigger guard,a wee bit off the trigger hanger and fettle the magazine lips.Bipod spigot is a home-made one as the threads in the forestock are 10-24 x 3/8...or they used to be...!There is a fixed stock adaptor holding the Ace on so its quite long and I had to get a rail as the eye relief ran out.
Potatocam?
Lost me too bro
Hi, how'd you find the cheek weld position with the ACE butt . . . lookn at similar ... cheers RQuote:
Originally Posted by marky123
