Printable View
give it another 4 days and the thread will die..except for overseas folks and those who have done the "big thing coming"....
it will be like hunting photos posted during lockdown being used as evidence of your activities.... the date photo taken wasnt taken into account
post up photo of new rifle and expect it to be seen as a triggering event.
Joined in the UTAS owners club quite at the start of the year. Got it all dressed up and comfortable as ARs are required to be haha
Attachment 227134
Attachment 227135
Also the scope mount is backwards because of the extended side charging handle. Since swapping to the BCM charger, I can revert that to the correct way once I've used up my current supply of 55gr and re-zero using 62gr loads.
Nice. I use a BCM charger for when I'm after goats.
Got my 1952 Fazakerley No4Mk2 today.
Has had a newer barrel fitted at some stage in its life (not FTR). But I wanted a shooter, not an all matching collector.
Attachment 227250
Attachment 227365
The Franchi .243 has arrived......:drool::thumbs:
@Ryan_Songhurst, what I'd the overall weight as pictured?Quote:
Originally Posted by Ryan_Songhurst
2.65kgQuote:
Originally Posted by hotsoup
Ryan can you comment on accuracy of your Howa Superlite setup?
I have looked at one a number of times at Custom Guns - to be honest memories of a mates Howa rusting up on a trip hold me back - not even sure if that is still the problem it used to be approx 13-15 years ago
If it came out in stainless then I would be keen
If your concerned about rust get Zane at delta mike to cerakote it for youQuote:
Originally Posted by Staffnurse41
Howa mini in Elude chassis.
16" (too long) 7.62x39
2.818kg
Attachment 228310
New stock for an existing rifle. Thanks to Tentman haunting his local shops bargain bin. Howa in 308.
The next job is to pull finger and work up a load for it.
Attachment 228314
@Joe_90
What make is that stock please?
oryx.....it's right there on the butt :thumbsup:Quote:
Originally Posted by norsk
That is an "O" On the stock?Quote:
Originally Posted by dannyb
yup also below the ejection port "oryx" it's a MDT stockQuote:
Originally Posted by norsk
https://broncos.co.nz/hunting/gun-pa...-chassis-olive
I haven't shot it yet, keep planning to but haven't quite got there. Will updateQuote:
Originally Posted by Staffnurse41
They are CerakotedQuote:
Originally Posted by Howa1500
Yup Dannyb is onto it. Oryx stock, poor mans chassis made by MDT in Canada. It's not a light weight set up! As pictured it's sitting on 6kg. With a thin profile 22" barrel.Quote:
Originally Posted by norsk
Quote
“If your concerned about rust get Zane at delta mike to cerakote it for you”
“They are Cerakoted“
Thanks yes they are cerakoted but still carbon steel so plenty of surfaces to rust. If I wasn’t thinking for a bush/adventure rifle would go for it. But plenty of experience in the Longwoods, Dean, Hauroko area comes with plenty of good and wet hunts
Couple of terrible picture's taken in a dark room tricky to photograph in the dark with no bipod to support the rifle il be sure to get some more snaps when bipods sorted and its out their doing it
What is it...I think the tag says 7mm??
Sent from my SM-G950F using Tapatalk
Duh brains abit dead from the long drive to go and retrieve its chambers in 7mmLRMQuote:
Originally Posted by kukuwai
Well it looks bloody nice [emoji106][emoji41]Quote:
Originally Posted by Kelton
Sent from my SM-G950F using Tapatalk
What make is the back ring?Quote:
Originally Posted by Kelton
Bloody nice and shit it felt nice and light.Quote:
Originally Posted by Kelton
Sent from my CPH2145 using Tapatalk
Their Hawkins HybridsQuote:
Originally Posted by TeRei
Good to see you I apologize for being such a zombie driving saps it out of me in that bloody weatherQuote:
Originally Posted by 25/08 IMP
Tauranga and back ? Dropped my Proof barrel off cupla weeks ago……I’m in the queueQuote:
Originally Posted by Kelton
B
No worries mate I was in a bit of a hurry as well.Quote:
Originally Posted by Kelton
Sent from my CPH2145 using Tapatalk
YepQuote:
Originally Posted by shift14
Hoping they feel some what the same to get behind
Attachment 228930
Bergara B14 Wilderness Hunter 300 Winchester Magnum
Maniatis carbon stealth suppressor
Leupold picatinny base, rings
Vortex Viper hs 4-16x50 scope
new tops setup, $5000+ setup picked up for $2500
That will be a great rifle on the tops! Hope you enjoy it!
I decided to buy a wood/blued .22LR for general plinking and cheap fun!
T1x with a Contessa rail, Warne low rings, Nikon Monarch 3-12 and a Hardy’s rimfire suppressor!
I’m 150 rounds in and loving it!
Attachment 229032
Attachment 229033
Nice :cool: if you ever wanna part with that Nikon flick me a pm ?Quote:
Originally Posted by JohnQT
Haha, sorry mate, I won’t be selling it. I’ve been keeping an eye out for another one to buy for another rifle! They’re great scopes!Quote:
Originally Posted by dannyb
Beauty!!!Quote:
Originally Posted by JohnQT
Do they have parrelex adjustment?Quote:
Originally Posted by JohnQT
YupQuote:
Originally Posted by SmokeyJason
Always thought i would sell mine when it come on a rifle i brought, but it has been faultless, dials perfect, really solid clicks and just a well made scope. Only thing is cross hair is a tad too thick for my liking.Quote:
Originally Posted by JohnQT
