Don't worry about a bubble level Rushy, They're just a waste of time spend those dollars on ammo & Waikato :D
Printable View
Don't worry about a bubble level Rushy, They're just a waste of time spend those dollars on ammo & Waikato :D
This thing is done for now, dont want to spend any more money on it untill I have shot it for a bit, was hoping to stick some decent glass and a dpt on it but will shoot it for a bit as is first, model 7 in 300saum, action trued, bolt and barrel fluting done by Robbie at Gunworks, Warne rings and a cheapish Lucid 4-16x44, MAE stainless muzzle forward can - heavy as sin but its really bloody effective. Just shot a box test with the scope on it this morning and it tracks well so will play with it for a while and try get a good load going.
http://i1374.photobucket.com/albums/...slwli2p2x.jpeg
1986 Brno ZKK 601 in .308
Attachment 50488
Gave the bolt some love with Wet n Dry and ground back the extractor spring that was catching on the action - its now much, much smoother
Attachment 50487
The LOP is fairly long so might have that addressed - makes the scope have to be mounted back rather far.
Attachment 50486
Couple of new tubes for the R93.
Hardy SS barrel fitted to a standard R93 reciever in Safari profile 26" long in 338 edge, had to trim the stock out to get it fitting nicely, ASE SL7 Can, only fired a few 300gr Elite hunters but initial results are bloody good.
Attachment 50619
Attachment 50620
Hardy SS Barrel fited to a standard R93 Reciever in 260 rem, Gunworks can, shoots 130gr VLD's with a lot of 2217 in one ragged hole, bloody impressed.
Attachment 50621
Attachment 50622
You'll be wrapped with that edge after getting jacked around buy that other clown.
Sent from my iPhone using Tapatalk
Ooooo edge in a blaser sounds cool. Wouldn't mind one for the r8.
How does the barrel interface with the receiver? Just screw in?