Gun Porn, show off your new toys

Quote:

---

Originally Posted by PerazziSC3

Only one came with the rifle, its a steel stoner one, seems to function very well.

CAA mount at this stage, maybe a PEPR and just a leupold vx1 2-7x33, should be a well suited scope

This is reasonably light with a 16" standard weight barrel. ( I no nothing about AR's by the way)

---

You don't need too know that much they are quite simple, and you can't stop at one neither. I had 5 till I met VC and then a certain KG and am down to 2 with new toy on the way (What can a man do with 5 ARs you can;t do with 2 :) ) 2 Have transformed into good U/O shotties and one into a (god forbid) Bolt action with a bit more ommmmph than a .223 . I have not owned one of these for 20+ years so its gonna be a re-learning curve remembering to work the bolt thingy

I'm pretty much at a point where I am running one bolt gun and two AR's. Does everything I want.

Quote:

---

Originally Posted by mikee

You don't need too know that much they are quite simple, and you can't stop at one neither. I had 5 till I met VC and then a certain KG and am down to 2 with new toy on the way (What can a man do with 5 ARs you can;t do with 2 :) ) 2 Have transformed into good U/O shotties and one into a (god forbid) Bolt action with a bit more ommmmph than a .223 . I have not owned one of these for 20+ years so its gonna be a re-learning curve remembering to work the bolt thingy

---

should've skipped the turnbolt and gone straight to the contemporary design, Blaserrrr


or AR10... DPMS Gen2 is looking good...


I basically just grab my AR whenever I go out the door to shoot something now

Quote:

---

Originally Posted by Banana

Not sure why, but someone removed my other photos.

Sent from my XT535

---

weird.

Quote:

---

Originally Posted by gimp

gone straight to the contempt design, Blaserrrr

---

Sent from my GT-S5360T using Tapatalk 2


??????

autocorrect

Quote:

---

Originally Posted by gimp

autocorrect

---

Fuckin got ya!:D:D:D

Sent from my GT-S5360T using Tapatalk 2

Quote:

---

Originally Posted by Banana

Yup

---

Like/dislike ? Fickle with ammo or is it a myth ?

Quote:

---

Originally Posted by Kscott

Like/dislike ? Fickle with ammo or is it a myth ?

---

The manual recommends to only run CCI minmags. It comes with two springs, a strong one for high velocity ammo and a weaker one for standard. I use the weaker one and feed it whatever's cheapest. Yes, it is a bit fickle with the cheap stuff. I mostly use Winchester 555 which seems to only have just enough energy to cycle the slide. Any variables that aren't in its favour (dirty chamber, weak grip) and it'll short stroke. When clean it'll run 99% with cheap ammo. Also runs more reliably with the can on it.

I do like it, but if I was to buy again I'd probably just get a ruger 22/45 or MK. While the Sig has a lot of features for the money, a ruger is better quality.

Quote:

---

Originally Posted by gimp

autocorrect

---

Your auto correct is rooted, correct spelling is "Blouser"

Quote:

---

Originally Posted by mikee

Your auto correct is rooted, correct spelling is "Blouser"

---

way of the future bro



not new but I put a new ACOG on it, temporarily

http://i58.photobucket.com/albums/g2...psxfwnowpj.jpg

Quote:

---

Originally Posted by Toby

My 6.5ai. Been paying for this since August last year so it's been a long time but finally got it in my hands its great. Weighs 3.8kg as seen in pic not sure if that's light but compared to all my other rifles it's still the lightest.

Now someone buy this http://www.nzhuntingandshooting.co.n...79/#post224674 so I can get my suppressor for it :D :D :D

https://fbcdn-sphotos-h-a.akamaihd.n...51bc526b347f6f
Haha it only just fits in that case by about 1cm because of the scope

---

Well I formed some more brass this evening cause I felt 21 wasn't enough so did another 21. Using winchester super x 140gr got this little group. Should kept shooting paper after I done that to see if I could do better but once zeroed I started shooting across the river at mud cause mud blows up. Will post up a video of some shots later.

Is it normal to get clean patches 4th time round. The first time I shot it I was shooting 3 shots clean and so on for 23 rounds. This time I shot 21 and never cleaned in between and gave it a quick clean at the end and it only took 4 patches to come out pretty clean

https://fbcdn-sphotos-h-a.akamaihd.n...5fcbe7c53893af

Nice shooting Toby:thumbup:

Sent from my GT-S5360T using Tapatalk 2

Quote:

---

Originally Posted by veitnamcam

Nice shooting Toby:thumbup:

Sent from my GT-S5360T using Tapatalk 2

---

+1

Quote:

---

Originally Posted by Toby

Well I formed some more brass this evening cause I felt 21 wasn't enough so did another 21. Using winchester super x 140gr got this little group. Should kept shooting paper after I done that to see if I could do better but once zeroed I started shooting across the river at mud cause mud blows up. Will post up a video of some shots later.

Is it normal to get clean patches 4th time round. The first time I shot it I was shooting 3 shots clean and so on for 23 rounds. This time I shot 21 and never cleaned in between and gave it a quick clean at the end and it only took 4 patches to come out pretty clean

---

That just depends on the particular barrel Toby. I have some barrels that come out clean after 3 patches and some that take 20+ and never come out truly clean.

Oil dry oil dry. I have never tried again in the morning not that fussy about it. I assumed it was clean when the 4th patch had next to no dirty look and a quick look in the barrel to see it shiny shiny

I run bore tech eliminator through mine. First patch takes out most of the carbon, then the rest is till the copper is gone.
I only clean them out every 50 rounds or so and keep logs on how many rounds through all my barrels and when they were cleaned etc.
In between they get oil to stop rusting.

Quote:

---

Originally Posted by Banana

The manual recommends to only run CCI minmags. It comes with two springs, a strong one for high velocity ammo and a weaker one for standard. I use the weaker one and feed it whatever's cheapest. Yes, it is a bit fickle with the cheap stuff. I mostly use Winchester 555 which seems to only have just enough energy to cycle the slide. Any variables that aren't in its favour (dirty chamber, weak grip) and it'll short stroke. When clean it'll run 99% with cheap ammo. Also runs more reliably with the can on it.

I do like it, but if I was to buy again I'd probably just get a ruger 22/45 or MK. While the Sig has a lot of features for the money, a ruger is better quality.

---

Cheers ta. I picked one up from DeadEye Dicks and have only put a few rounds thru it with CCI SV with the softer spring installed. Just waiting for a DPT suppressor then time to have some plinkin' fun. Bit different to shoot than my CZ and cheaper.

Quote:

---

Originally Posted by gimp

not new but I put a new ACOG on it, temporarily

http://i58.photobucket.com/albums/g2...psxfwnowpj.jpg

---

What BCG is that?

Les Baer

Yeah LBC.

I have a DD chromed one too, not M16 but I'm a sucker for dat chrome. So easy to clean and also shiny.

Does a flash suppressor serve any usefull purpose for a civilian?

Sent from my GT-S5360T using Tapatalk 2

Yeah, it reduces muzzle flash/blast and some muzzle rise from recoil without being horrifically obnoxious like a brake. Also in that case, allows QD suppressor to attach

A bare muzzle with no device is much worse to shoot/be near

Quote:

---

Originally Posted by gimp

Yeah, it reduces muzzle flash/blast and some muzzle rise from recoil without being horrifically obnoxious like a brake. Also in that case, allows QD suppressor to attach

A bare muzzle with no device is much worse to shoot/be near

---

Interesting, never seen one up close and had always thought they would be like a brake that didn't work.

Sent from my GT-S5360T using Tapatalk 2

Quote:

---

Originally Posted by veitnamcam

Does a flash suppressor serve any usefull purpose for a civilian?

Sent from my GT-S5360T using Tapatalk 2

---

Helps protect NV gear, offers a QD option for certain suppressors

Quote:

---

Originally Posted by Beavis

Helps protect NV gear, offers a QD option for certain suppressors

---

So what's the benefits over something like a lighter weight can as that will reduce light, sound and muzzle jump? Is it purely just a balance/weight thing?

Quote:

---

Originally Posted by Nibblet

So what's the benefits over something like a lighter weight can as that will reduce light, sound and muzzle jump? Is it purely just a balance/weight thing?

---

Well I have basically stopped using the Ase Utra as it's too heavy.... waiting on a certain titanium QD can to come to market.



a FH is lighter + shorter than a can if you're worried about that, and happy to wear earplugs. FH is probably more effective for reducing muzzle movement too, and still quieter than a bare muzzle for the shooter

Quote:

---

Originally Posted by Nibblet

So what's the benefits over something like a lighter weight can as that will reduce light, sound and muzzle jump? Is it purely just a balance/weight thing?

---

Totally, but also consider that suppressors are restricted in some jurisdictions

Quote:

---

Originally Posted by Beavis

Totally, but also consider that suppressors are restricted in some jurisdictions

---

Not NZ surely?

Quote:

---

Originally Posted by veitnamcam

Not NZ surely?

---

No, but Canada + the US for example... rather have a FH than a bare muzzle or a brake in those places.

in the US I'd jump through the NFA hoops to get cans, but no chance in Canadia

Quote:

---

Originally Posted by gimp

Well I have basically stopped using the Ase Utra as it's too heavy.... waiting on a certain titanium QD can to come to market.



a FH is lighter + shorter than a can if you're worried about that, and happy to wear earplugs. FH is probably more effective for reducing muzzle movement too, and still quieter than a bare muzzle for the shooter

---

This can?

https://www.youtube.com/watch?v=-cNudw3mhJc

I'm guessing he is waiting for the qd odl can

Quote:

---

Originally Posted by veitnamcam

Does a flash suppressor serve any usefull purpose for a civilian?

Sent from my GT-S5360T using Tapatalk 2

---

Yep - it ups the badass level of any firearm

@redbang ...........


Sent from my iPhone using Tapatalk

Quote:

---

Originally Posted by Dead is better

Yep - it ups the badass level of any firearm

---

Lol much like tactacool slings on civi ar's

Sent from my HUAWEI Y210-0100 using Tapatalk 2

Quote:

---

Originally Posted by BRADS

@redbang ...........


Sent from my iPhone using Tapatalk

---

Yeers ?

Quote:

---

Originally Posted by Neckshot

Lol much like tactacool slings on civi ar's

Sent from my HUAWEI Y210-0100 using Tapatalk 2

---

I think you have something two show:)


Sent from my iPhone using Tapatalk

Quote:

---

Originally Posted by res

I'm guessing he is waiting for the qd odl can

---

Yep

Your not the only one,love his 308 can on a blackout-works better than any other can I have seen and is so so light

Quote:

---

Originally Posted by BRADS

I think you have something two show:)


Sent from my iPhone using Tapatalk

---

Negative. But I wish

Sent from my HUAWEI Y210-0100 using Tapatalk 2