Go the Western:cool:
Printable View
Go the Western:cool:
And I have the coach gun as well. Just don't have the single actionsQuote:
Originally Posted by Dundee
Attachment 29435
A recent purchase but not 'new'
Attachment 29450 Bought a new Plinker this week BRJ .22 LR savage , Fitted a scope and legs had the morning off to go sight it at 50 yrds using CCI 40 grn Velocitors , pretty happy with it tried get a bit serious and shoot some reasonable 5 shot strings but ole mother nature gusting all over the show kicks ya arse :)
Nice! I thought about a BRJ but went for the BTVS instead. :)
I must be lucky or you were really young? I found it really pleasant to shoot. You had me worried as my first shot I was remembering this comment and it does have a solid butt pad so I was waiting for a sore shoulder but nope. :)Quote:
Originally Posted by wsm junkie
This one must be under 20" as its tiny. They were made with 19" barrels I thinkQuote:
Originally Posted by 7mmsaum
It didn't sound too bad from behind it but I had a mate getting the bike reckons it sounds mean as from a distance
Blaser R8 with my 6.5x55 barrel on it. Barrel arrived on Wednesday morning and was in the hills on Thursday. All load work done by the norma factory, cost $75 per 50 rounds.
http://tapatalk.imageshack.com/v2/14...e54978d1d6.jpg
Shoots ok to. First 5 shot group with only 10 rounds down the barrel. This group includes the cold and clean bore shot to, so there is no need to foul this barrel before you go hunting.
http://tapatalk.imageshack.com/v2/14...c992ac57ff.jpg
Awesome. could you elaborate on this please.Quote:
Originally Posted by L.R
You have your pic of the rifle reversed? Bolt is on the gay side😊
I suspect you can improve your shooting with a lighter cheek weld. It will tighten that group up at least😂
Very nice......for a gay 8
Sent from my SM-G900F using Tapatalk
Off the shelf factory Norma ammo.Quote:
Originally Posted by username
Norma factory ammo. Norma brass with a 144gr Sierra HPBT BC is .580. Almost cheaper than buying norma 6.5x55 brass by itself.Quote:
Originally Posted by username
There's a Blaser takeover brewing in the forum ;)
They won't take over but they have their place.
Time to start the 'Howa 1500 liberation movement'....or is that bowel movement??????Quote:
Originally Posted by L.R
Is that the Oamaru valley LR?
I was hoping to have the first poo brown blouser stock on NZHS, ah wellQuote:
Originally Posted by L.R
got 500rds of that norma stuff too, hope it shoots as well in mine
lot of great minds thinking alike at the moment it seems (or thinking alike 9 months ago, with wait times.... :( )
I've had this one nearly a year now.
Just watching some gun porn on seven sharp!😉
Mmmmm Tiffany
Sent from my SM-G900F using Tapatalk
Very nice! Is that an ATACR? How are you finding it?Quote:
Originally Posted by L.R
Yea mate it is a ATACR. It seems like a nice scope so far. Eye box is a little tighter than a NXS but other than that it's been good. It's for my 300 Blaser mag barrel which has just arrived so I'll have more of a play with it on that before I have a full opinion on it.
Shoots tight, have you any idea of speed LR
2400ish or something. SloooooooooooowQuote:
Originally Posted by jakewire
Yea is real slow 2425 ave over oehler. That's fine for out to 400m tho since it's so accurate. I shot it at 550m and the wind was blowing a steady 10mph and still managed a 3 1/2" 5 shot group. It's one of those things where you just forget about the velocity number and enjoy putting your projectile on target, also enjoy the massively extended barrel life.
Had 1000rds of the stuff your shooting sitting at my place untill the owner took it away this morning.
By the look of your shooting I should have tried to nic some and stuff the rest of the box with paper.:)
Not bad.....apart from the 4th and 5th shots below your finger.Quote:
Originally Posted by L.R
Have you cut your barrel LR.
I had possession of a brand new R8 yesterday, met the deliverer at the local, and he promptly cut 2" off the end of the barrel, straight out of the box, damn.
Frigging glad it wasn't mine.
Quote:
Originally Posted by Shearer
Yeah, I don't think so sunshine. It's a one holer setup. Seen it plenty of times, including the one in the photo.
But haters gonna hate.
Pete is insane.Quote:
Originally Posted by jakewire
AwQuote:
Originally Posted by Proudkiwi
Na my barrels not cut. I actually pay the ridiculous price to have the factory thread the barrel. The blaser isn't really lightweight or real handy so I don't see cutting a couple of inches off making much difference practically, but we all use them differently so each to ones own I guess.
That was me zeroing the scope. The two shots I fired to zero are probably better than your groups on a good dayQuote:
Originally Posted by Shearer
Dunno about insane.
Disturbed maybe.
Just taking the piss mate. Figured you wouldn't be showing it off otherwise.Quote:
Originally Posted by L.R
It gets worse. He is a Coasty now as well.Quote:
Originally Posted by Proudkiwi
Sent from my SM-G900F using Tapatalk
Where did he get the extra thumbs?Quote:
Originally Posted by R93
Sent from my GT-S5360T using Tapatalk 2
They automatically appear when you are granted permanent residence http://www.sherv.net/cm/emo/laughing/roflmao.gifQuote:
Originally Posted by veitnamcam
I have had a few days away from work and thought it was time to get this thing finished.
Thanks to @Kiwi Greg for the arranging the gun plumbing, optics and load development.
Specs:
260 Rem
Sako 75 Stainless Synthetic (Boat anchor)
22” Shillen 1-8”
McMillan Sako 75 Hunter – Edge Tech
Leica ERi 2.5-10x42 .1 mil
Weight – about the same as my walnut/stainless 75
Attachment 29890Attachment 29891Attachment 29892Attachment 29893
That's some good looking gun porn right their mate :P real nice :thumbsup:
Very nice indeed Kokako
Drooooool....ahhheee, now ive got to clean my keyboard......
