Gunsmith challenge!

Quote:

---

Originally Posted by 40mm

I bet they will outlaw that too....

---

Could be.

Quote:

---

Originally Posted by Cordite

Speaking of gunsmith challenge. Anyone used aluminium stick welding rods on their AR mag wells?

---

the challenge will be finding an ar to do it on after everyone has handed them all in plus I bet after all this is done if you all of a sudden appeared with one in any configuration youd get it taken off you anyway wouldn't it be easier to get yourself a howa mini

Quote:

---

Originally Posted by Cordite

Speaking of gunsmith challenge. Anyone used aluminium stick welding rods on their AR mag wells?

---

From the police website:

Can I modify my firearm that has been reclassified so it is lawful?

No.

Quote:

---

Originally Posted by fetchfire

From the police website:

Can I modify my firearm that has been reclassified so it is lawful?

No.

---

I think we all know the police website isn't the correct place to get the actual facts about the new ban, they are still saying pump shotguns are going to be banned arnt they. I noticed the NZDA are now saying pump shotguns are to be banned as well.

Quote:

---

Originally Posted by 40mm

I am going to exercise tongue biting technique from now on.

---

Tried that, got a sore tongue and blood everywhere. It just doesn't work ;)

Quote:

---

Originally Posted by northdude

the challenge will be finding an ar to do it on after everyone has handed them all in plus I bet after all this is done if you all of a sudden appeared with one in any configuration youd get it taken off you anyway wouldn't it be easier to get yourself a howa mini

---

Shhh thats my plan. Got to do something with my 5 round mini 30 mags

Quote:

---

Originally Posted by Steve123

Shhh thats my plan. Got to do something with my 5 round mini 30 mags

---

Wait till the law comes out. Mags can be shortened with a bit of TLC and a dremel. I'd never hand in a 30 rd mag if I can repurpose it as a 5-rd mag plus a bit of spare mag spring.

Quote:

---

Originally Posted by Tommy

I had an old beater No1Mk3 that had the barrel set back, rechambered in x39, and fed from a mini 30 magazine.

[EDIT:] Either way you'll be screwed by the big mags with new law coming in. Setting one up inside a modified LE 10 round might be the go, esp if you can use strippers into it

---

Hi
Did it use the original bolthead and ejector?

Quote:

---

Originally Posted by marky123

Hi
Did it use the original bolthead and ejector?

---

I didn't build it, and it's been onsold, but I seem to remember that it had a little collar silver soldered into the standard bolt head

Quote:

---

Originally Posted by Cordite

Wait till the law comes out. Mags can be shortened with a bit of TLC and a dremel. I'd never hand in a 30 rd mag if I can repurpose it as a 5-rd mag plus a bit of spare mag spring.

---

Nah mine are 5 rnd mags. Kosher in the 30 till 3pm the other day. Don't want to throw em away

Sent from my SM-G390Y using Tapatalk

youd probably warp the shit out of the lower as well

Quote:

---

Originally Posted by berg243

there are alloy brazing rods available that work with lower than normal flame temps . was some on tardme.

---

Yes, they work well. Used them to weld up a frame for a new fuel tank on the lawnmower.

https://www.youtube.com/watch?v=n1njyuPBIH0

The stuff is quite hard.

Stick the lower in water and tig a plate over the bottom of the reciever with a five round mag in it.

Quote:

---

Originally Posted by fetchfire

From the police website:

Can I modify my firearm that has been reclassified so it is lawful?

No.

---

still brings you back to this tho

Its been done many a times, I'm sure. The problem with projects like this is cost. It takes time to do projects like this with lots of R&D involved. Time is money and very few customers are willing to pick up the bill. Normally if something like this is build its done by a friend with time on his hands.

I once worked with a young smith that changed a enfield so it will fire 45 ACP. Lots and lots of manufacturing.

Nothing stopping you from making friends with a hardy good fellow that owns the right tools?

I would rather invest my money in a Howa mini in 7.62x39?