Rifle back today, bit of lipstick and a 20” 6.5PRC switch out set.
2 mins odd for me to go from .300PRC to 6.5PRC
Attachment 161398
Attachment 161399
Attachment 161397
Printable View
Rifle back today, bit of lipstick and a 20” 6.5PRC switch out set.
2 mins odd for me to go from .300PRC to 6.5PRC
Attachment 161398
Attachment 161399
Attachment 161397
What is the length of the mags that you are using for the 300prc? 3.715 or 3.850"
Are they the same for the 6.5 prc or are they short action mags?
Great setup! Do you have a load for the 6.5?
they are using the same mag (not a details guy) - i went long action to ensure i could do both. due to it being light a little bit more length was not a deal breaker.Quote:
Originally Posted by Friwi
due to limited availability of components i went for high performing factory at this stage. once i have empty brass ill look to have some loaded up.Quote:
Originally Posted by WillB
Whats she weigh with scope mag bolt and suppressor?
If you’re talking about Precision Hunter 143 ELDX I have yet to better it with handloads in my Defiance 6.5 PRC custom. They shoot under .5 MOA. Best I can repeatably get so far is .75 with 140 Accubonds. This is with IMR 7977 I would like to try other powders but like you say availability...
Yo @WillB try superformance, about 200 fps faster than factory loads and a one hole wonderQuote:
Originally Posted by WillB
Yo @WillB try superformance, about 200 fps faster than factory loads and a one hole wonderQuote:
Originally Posted by WillB
@Gkp Thanks mate I will if I can find some. Although since the barrel settled in I’m now getting up to 3k with the precision hunters out of a 22” barrel. The ES is high though. I haven’t quite given up on the 7977 I’ll come back to it after the SI trip coming up week after next. Sorry guys total hi jack. ��Quote:
Originally Posted by Gkp
4.1kg big fellaQuote:
Originally Posted by veitnamcam
@rogers.270 Did your barrel channel get layered in carbon or is it still grey filler?
how are you finding the NX8? worth the coin?
