Finally got it set up exactly how I want it. This is an H&K SP5 (semi auto MP5), set up in an A3 form, with a Surefire 628 light front end. Any other MP5 owners?
https://i.imgur.com/ML3zD3D.jpg
Printable View
Finally got it set up exactly how I want it. This is an H&K SP5 (semi auto MP5), set up in an A3 form, with a Surefire 628 light front end. Any other MP5 owners?
https://i.imgur.com/ML3zD3D.jpg
Lucky bugger, we can’t have one of those here.
We aren't too much better here. These are sold as "pistols", meaning no stocks, and you have to file the same paperwork you'd need to file for a suppressor or a machine gun to be able to put a stock on them. It's a $200 tax to the government, and you have to wait for your paperwork to be approved.Quote:
Originally Posted by Finnwolf
I know what you mean, I’ve a friend who manages a gun shop in Texas and hell, you guys have to jump through hoops to get a suppressor, not sure why the authorities are so anal about them.Quote:
Originally Posted by Joe Bob Briggs
this is what happens when people with no idea make the laws
I think they'd like us to think they have no idea. What it all boils down to is control, and government hates giving up control.Quote:
Originally Posted by Bill999
We can but you have to have the right license endorsement and can't fire it...unless it's for held under a theatrical endorsement.Quote:
Originally Posted by Finnwolf
Iv never been so interested in joining the theatre
weird girls and machine guns, IM IN.
My MP5A3 (select fire) is complete with collapsing and fixed stocks and QD suppressor. Mine is not H&K but the more reliable POF licensed version. Original H&K's have a parts breakage problem due to extra hard components. POF have gone for toughness rather than hardness and have a more reliable product as a result.
Attachment 131919
Sorry, but that's total BS lol.Quote:
Originally Posted by gundoc
What's BS about it? Do you have something against Pakistan Ordnance Factory productions? They know their guns, might say they have real gun culture there.Quote:
Originally Posted by Joe Bob Briggs
Being new to a forum does not equate to being new to firearms. I'd love to see empirical data showing that the Pakistanis can produce a better MP5 than Heckler & Koch.Quote:
Originally Posted by Cordite
ETA, I see you edited your post. I'm not saying the POF is a bad firearm, but that's a bold statement to say that the POF guns are netter than a German built MP5.
Aren't the POF's made on HK tooling with the factory TFP?
They are. Just like the MKE factory in Turkey. That being said, having the tooling and the instructions from the 1960s-70s doesn't mean you will end up with the same product at the end of the day. There have been changes to the design internally (mainly the move to "F" parts) over the years, and I do not believe those changes were passed on to the other factories. I haven't seen a POF or MKE gun with F parts.Quote:
Originally Posted by Beavis
Here is a post from Henderson Defense aka Battlefield Las Vegas, a premier full auto shooting range at a tourist destination. I don't think there is a spot on the planet that goes through more ammunition. I have bolded the key points.
https://www.ar15.com/forums/armory/M...nes/9-476802/?
Quote:
Hi folks,
I've started a few threads in the various forums discussing our experiences with high-volume shooting on our range. We are now approaching, if not surpassing, 860,000 rounds per month We only use our ammo with our weapons as customers cannot bring their own weapons onto our range. We have provided this information to several state and Federal agencies as a form of "test and evaluation" on extended use and our results. That being said, I can provide you with a little insight into what our experience with HK's and HK clones. From this point forward, I will refer to all weapons as HK unless I am providing detail on a certain clone brand/mfg.
The most often used HK at our range is the MP5 followed by MP5K, then the MP5-SD, UMP-45/49 and finally the G3 (or semi the semi HK91 variant). The number one thing I can say about keeping the HK platform reliable is changing recoil and extractor springs. On our MP5's, we change extractor springs every 2-3 days. We've used the MP5-specific copper spring, the stronger steel G3 spring and aftermarket black extractor springs and they all give us about 2-3 days of hard use. We will bend them once before replacing but that's about as good as it gets for us. With the volume of ammunition we are putting down range, there has been no way around it.
The recoil spring is a completely different beast. By not changing it often enough, you will eventually destroy your receiver. The problem with the recoil spring is that it's right in front of your face but it rarely got changed up until recently. We now have a PC in the armory so the armorers can leave reminders to change springs out after three months. We've lost MP5 and G3/HK91 receivers because not changing the recoil springs. The receiver will start to bulge where the bolt carrier bottoms out at the stock. The weak recoil spring allows the bolt to come back with so much force that the rollers eventually to put reverse dimples/bulges on both side of the receiver. If not caught soon enough, the roller will eventually just start getting caught in those dimples and the bolt carrier will stay stuck to the rear. The other issue that occurs is the receiver will crack where the rear stock pins attach. Both issues are caused by the bolt carrier group slamming back so hard that the sheet metal eventually gives. We just recently lost a PTR-91 due to a VERY weak recoil spring that cause the rear of the receiver to crack. This rifle was never run full-auto but is shot daily because it's in one of our more popular packages (sniper package). I did have an original HK SR9 on the line but after five or six months of range use, the factory SR9 stock cracked. At that point I pulled the rifle from the line as it was one of my personal rifles. I never meant to keep it on the line and used it to see how well the package would do.
We keep (+) size rollers to keep the weapons running as the bolt gap slowly fades away. We have a decent inventory and pull and replace as needed. It's a simple fix for the HK platform but once they no longer work, it's time to push the barrel out and replace it. Once a new barrel is installed, you can grab your original rollers and set the bolt gap to those spec's and use them all over again. When replacing the barrel, we've always replaced our locking pieces. I don't know the proper terminology for it, but the angles that allow the bolt and rollers to lock up and go into battery, eventually wear away and won't provide a proper bolt gap. Replacing barrels isn't the easiest task and so I asked Tony Dee from the Gun Store (who has decades of experience on MP5's) to train my guys on when to replace the barrel and went to take it a step further.
We had approximately twenty MP5's that were down due to continued cycling issues. Tony explained to us that since some of our weapons were in the 400,000-500,000 round count, we needed to swap out the trunions. He showed us exactly why we were experiencing so many issues and all the (+) size rollers and new barrels wouldn't correct the problem. I had the staff do complete rebuilds on approximately fifteen of our MP5's. New trunions, barrels, bolt carrier groups, cocking tubes and recoil springs were ordered. After all of the time spend on doing the rebuild program, we've concluded that it's best to just demil or scrap the MP5's and start with new units. The issues we had were not limited to one brand but spread across all of the various manufacturers.
So, this leads to our experiences with all the different manufactures. We have used the following brands on our range: HK, Cohaire, PTR, Century (the HK-53 clone and CETME Sporter), POF, MKE, Special Weapons, Zenith and the Atlantic Firearms variants. Not one of these brands has really outlasted the other. Only one time did we receive a batch of POF's that we had problems with from day one. The rollers must not have been heat-treated properly because all of the rollers cracked within the first week of use. Once we replaced the rollers, the weapons went on to function for thousands upon thousands of rounds. The only model we never used were the cast receivers from Special Weapons or Cohaire, I don't remember who made them. We do have some Special Weapons stamped receivers that are over ten years old but they are finally being retired. ALL of the receivers eventually cracked where the receiver pinches the trunion and we welded them back up. I never considered this a safety or liability issue and they remained on the line.
We pulled thirty plus MP5's this past weekend and will start the demil process. Some of the receivers that were not converted to full-auto will be sold to staff members but they will get the whole firearm for $200 and these include the some of the receivers that just went through the full rebuild. I felt that the receivers were all in such different conditions and age that it would be better to start fresh at this point. We purchased thirty standard Omega MP5's, five Omega MP5K's and five Omega MP5-SD's and five PTR-91's.
I also want to mention the various types of magazines we on the range. We use POF, MKE, the Taiwan-made magazines with parkerized finish and chrome follower as well some HK factory mags mixed in. They all seem to function about the same but the HK factory units do last the longest. The biggest problem with them is weak springs that cause malfunctions. These magazines can get loaded 50-60 times a day and the springs don't last forever. We used to replace the springs with Wolff extra power springs but at this point, it's cheaper and more efficient to just replace the magazine.
I know there are quite a few things that I skipped right over so if I didn't bring it up, please ask me and I will try to answer the best I can. It's been a long day and I didn't mention anything about the various brands of parts we use or how often we replace other parts, which parts fail (other than springs), etc. As with the other threads, I started this thread for all the people are thinking about taking the plunge and purchasing a HK platform. It's not the cheapest platform out there but it's simple and reliable design with SO many choices for replacment parts that they really are a good purchase.
Have a quick shufti at my profile and you will see that I have a smidge of experience in this field. My criticism of H&K is based on years of personal experience repairing (and using) their products. There is also the fact that I have seen and handled the large pile of dead MP5's that have failed in use by an unmentionable group within our Defence Force. My own experience with a good few MP5's over the years only reinforces my comments.Quote:
Originally Posted by Joe Bob Briggs
I will add that H&K guns go well until they stop. Those fairly frequent times are almost always caused by parts breakage.
How many high round count POF MP5s have you handled? And what failures did you see on the HK rifles? Most breakdowns of roller delay guns are due to extractor springs, magazines, and bolt gap.Quote:
Originally Posted by gundoc
About half a dozen POF's, all of which never gave any problems and are still going. Rifle problems are fractured receiver covers, fractured bolts, fractured rollers, fractured return spring arms (rimfire semi-autos), fractured pins, burred out trunnions, etc, as well as all the other problems you mentioned. A good number of H&K rifles were used by the venison recovery industry and were found wanting compared to other rifles, but, to be fair, these rifles were all firing many thousands of rounds. By comparison the FN FAL would go through several re-barrels without breakage over several hundred thousand rounds. With our Special Forces the H&K MP5's usually crapped out within a year. H&K offered NZ free military rifles some years ago provided we signed a long-term service contract. The offer was refused.Quote:
Originally Posted by Joe Bob Briggs
I believe Battlefield Las Vegas attribute those problems to worn recoil springs.Quote:
Originally Posted by gundoc
Quote:
The recoil spring is a completely different beast. By not changing it often enough, you will eventually destroy your receiver. The problem with the recoil spring is that it's right in front of your face but it rarely got changed up until recently. We now have a PC in the armory so the armorers can leave reminders to change springs out after three months. We've lost MP5 and G3/HK91 receivers because not changing the recoil springs. The receiver will start to bulge where the bolt carrier bottoms out at the stock. The weak recoil spring allows the bolt to come back with so much force that the rollers eventually to put reverse dimples/bulges on both side of the receiver. If not caught soon enough, the roller will eventually just start getting caught in those dimples and the bolt carrier will stay stuck to the rear. The other issue that occurs is the receiver will crack where the rear stock pins attach. Both issues are caused by the bolt carrier group slamming back so hard that the sheet metal eventually gives
Just one more drool...
Attachment 131934
My original H&K MP5-N
New in the box, never fired a round. Except at the factory
Attachment 139964
It’s not new in the box, it’s out of the box, very second hand
Sent from my iPhone using Tapatalk
the profile says n.z, the power board says elsewhereQuote:
Originally Posted by ArlingtonArms
that you komrade cindy or one of your minions ?
www.arlington-arms.comQuote:
Originally Posted by gonetropo
:)
We had a ton of stuff with foreign-to-here plugs that we ran for a while by converting the plugs on a couple the multi-boards that came over with them (then changed plugs on everything as time went by. Still have a multi board somewhere for visitors from that part of the world)Quote:
Originally Posted by gonetropo
Must be dodgy then - even went to the expense of importing that cheap Morton fizz i get from Pak n Save to wherever he is in the world. That there is dedication:thumbsup:Quote:
Originally Posted by Tommy
@gundoc You my good sir are a master of understatement. to say that you have "a smidge of experience in this field" is like saying Bill gates has " a smidge of cash available to him".......Quote:
Originally Posted by gundoc
For what it is worth, @Joe Bob Briggs I would strongly suspect that even H&K would listen to someone like this gentleman....
