Thread: Help! Stuck action screw

Originally Posted by Nick-D

Yeah w
This would be how I would usually go about it but may be a mission as this screw has a fat shank that runs about 15 mil down before the thread starts. Can see myself ballsing somthing up. Might give the drill and studd remover a go. Be a useful top to have anyway

Just use a drill that's slightly larger than the diameter of the shank not the diameter of the screw head go steady and it will just ping the head off if you were close I'd do it we get it all the time with home handicaps trying to fix their cars

Originally Posted by northdude

Just use a drill that's slightly larger than the diameter of the shank not the diameter of the screw head go steady and it will just ping the head off if you were close I'd do it we get it all the time with home handicaps trying to fix their cars

Yeah the shank on these screws is the same diameter as the screw head and runs down to where it tucks in to make contact with the pillar. Doable for sure but would have taken some drilling!

Sent from my CLT-L09 using Tapatalk