Printable View
Before I spend ages online trying to find an answer, does anyone know if a 20 inch tikka rem mag with a "super pig" DPT suppressor would fit in an MDT HNT26 chassis. I haven't cut it yet and I would like to future proof. Very specific question but maybe someone has done it.
If you have no joy, work out the proposed dimension on your rifle then email MDT customer service for the dimensions from say front action screw to end of stock.
I've recently had great online customer service from the guys at MDT re stock measurements.
Thanks a good idea. I held a 20 inch tikka "super pig" next to a rem 700 hnt chassis today to eye ball it. I would guess the tikka barrell would need to be 20 and a half inch or 21 inch to fit in that chassis.
i have a 16 " tikka and an 18 " begara in the hnt 26's. using an over barrel DPT on both. 18 " has a couple of inches of barrel between the end of the forestock and the suppressor bush mount, the 16 " has the suppressor bush mount going into the fore stock
Attachment 264339
Given the above photos and details 20” should be sweet
Mk2 Dpt magnum cans come back 170mm, how far does yours come back? Work that out and you'll have your answer.
