Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Terminator DPT


User Tag List

+ Reply to Thread
Results 1 to 5 of 5
Like Tree5Likes
  • 3 Post By Friwi
  • 2 Post By Jaco Goosen

Thread: how to tell 9/16x24 vs m15

  1. #1
    Member
    Join Date
    May 2018
    Location
    wellington
    Posts
    1,796

    how to tell 9/16x24 vs m15

    Have my 7mm practical which came with a brake, and a suppressor. the brake screws on nice and tight with good threads, the suppressor threads on losely until it touches the shoulder and then fits tight. The suppressor is an m15.

    Barrel thread od = 14.18mm,
    Brake internal od = 13.12mm

    vs the suppressor being an m15

  2. #2
    Member
    Join Date
    Jun 2013
    Location
    Middle Earth
    Posts
    4,287
    9/16-24 is 14.29mm outside diameter and Internal is about 13.2 depending of the manufacturers tolerances.

    15x1 is 15 mm outside diameter and about 14 mm internal .

    Don’t shoot with your 15x1 suppressor screwed onto your 9/16-24 barrel or you might end up with a grenade launcher and see your suppressor disappear and wreck its threads.
    ZQLewis, Larskramer and RUMPY like this.

  3. #3
    Member
    Join Date
    Jul 2017
    Location
    Whangarei
    Posts
    1,188
    Yep, in my world an M15 male thread will be 14.8-14.9mm od. (Hose & hydraulics.)
    See above.

  4. #4
    Member
    Join Date
    Jan 2016
    Location
    Kapiti Coast
    Posts
    988
    Hey bud. On this type of thread you should be able to measure the outside diameter.

    9/16 should measure 14 to 14.29mm and M15 should measure very close to 15mm(14.85 to 15mm).
    dannyb and Larskramer like this.

  5. #5
    Member
    Join Date
    May 2018
    Location
    wellington
    Posts
    1,796
    Quote Originally Posted by Jaco Goosen View Post
    Hey bud. On this type of thread you should be able to measure the outside diameter.

    9/16 should measure 14 to 14.29mm and M15 should measure very close to 15mm(14.85 to 15mm).
    So looks like the barrel is 9/16x24 then! and the suppressor is an m15. awesome! time to sell it and upgade it

 

 

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!