Thread: Howa Bolt Fluting

[QUOTE=Oli1102;846120]Hi all,

I am looking at getting the bolt fluted for a Howa 1500 (Short Action) I have recently purchased. I know it is largely aesthetic but Im putting a bit of coin into this build with optics, chassis etc so figure whats $150 in the scheme of things. I am also hoping the slight reduction in weight will make bolt throws lighter and therefore quicker/smoother.

I have looked at historic posts and notice that largely people are suggesting Gunworks. I contacted them and they stated that the Howa steel is harder than other manufacturers and wears their tooling excessively... So they wont do it... Any other suggestions or recommendations? I emailed Greystone as I have only ever seen good things and high standard come out of their shop but haven't had a response in a month or so.[/QUOTE @DPT @Friwi

Could email Dean Maisey

Or Arthur Cleland

Or mae.

Or Allan Carr in Wellington.

[QUOTE=Russian 22.;846125]

Originally Posted by Oli1102

Hi all,

I am looking at getting the bolt fluted for a Howa 1500 (Short Action) I have recently purchased. I know it is largely aesthetic but Im putting a bit of coin into this build with optics, chassis etc so figure whats $150 in the scheme of things. I am also hoping the slight reduction in weight will make bolt throws lighter and therefore quicker/smoother.

I have looked at historic posts and notice that largely people are suggesting Gunworks. I contacted them and they stated that the Howa steel is harder than other manufacturers and wears their tooling excessively... So they wont do it... Any other suggestions or recommendations? I emailed Greystone as I have only ever seen good things and high standard come out of their shop but haven't had a response in a month or so.[/QUOTE @DPT @Friwi

Could email Dean Maisey

Or Arthur Cleland

Or mae.

Or Allan Carr in Wellington.

Dean wont flute unless he has had a change of heart