How's it going team talked to gunworks and they said they didn't rechambered tikka or howas as the barrels are too hard, does anyone know of any gunsmiths that will open out my howa 7mm08 to 284 in the south island l, cheers
Printable View
How's it going team talked to gunworks and they said they didn't rechambered tikka or howas as the barrels are too hard, does anyone know of any gunsmiths that will open out my howa 7mm08 to 284 in the south island l, cheers
Darn. Im up north.
Otherwise I'd say; Send it my way mate. My 284 reamer is throuted long though. Best suited for long action usage.
tikkas are notorious for this, ive seen a few fitting rechamebered 700 708 barrels as no smith wanted to touch a tikka, never heard howas having the same problem and have seen a few rechambered with original 708 barrel
if you have your own reamer it wont be a problem
I done a tikka 708 to 280rem with mitch maxberry with my reamer and it wasnt even mentioned
I know Dave Ward at Dovedale has done Tikkas before.
There's a howa on tardme atm
https://www.trademe.co.nz/a/marketpl...3?bof=ZZchDkwm
The internal mag length on the sa is to short for the 284 imo. I would just crank up some spicy handloads with the 162 eldm if you want some extra lr grunt/capability with the 7mm08
Good suggestion Nick. 7-08 Ackley is another option.
If you're doing a bushpig, just stick with the 7mm08 and run the 162gr.
My 18inch 7mm08 tikka long action has taken game at 602meters a very similar distance to my 18inch 284 bushpig with alot less powder.
Does anyone have a reamer for this?Quote:
Originally Posted by Jaco Goosen
Yup....��
Alan carr will do it
Cheers for the info guys I've managed to get plenty of room in the mag and dummied up a round using a 154sst and it looks good, I've got a large quantity of h4831 to use with the 284 which is part of the reason I'm going to it plus I've got 150 shells and 200 154sst projectiles and a couple boxes of factory ammo, bought the gun for the build, also already have a 308 that I've been taking game out to 500yrds with just wanted to set something up with a little bit more down range energy
Get it throated for the sst load and you should be right mate, think my 284 loads were over 3 inches with 162sQuote:
Originally Posted by 7remmagman
Get it throated for the sst load and you should be right mate, think my 284 loads were over 3 inches with 162s loading to 20 thou of the lands on a standard throat chamberQuote:
Originally Posted by 7remmagman
Also using the 162 eldm in the 7mm08. Not very fast but dam effective down range. I think they expand better with the slower fps down range. Ultimate reloader on YouTube did a comparison between the Eldx and the Eldm which was interesting.