Thread: installing an over barrel can easy to do your self?

Originally Posted by rambo-6mmrem

@DPT if i sent you the messurements from 105mm back from muzzle? are you able to do the job and if so how much do you charge

Yes we can do that, we don't charge to machine out the bush, only freight charge. The correct measurement is 88mm back from the thread shoulder, we normally do the muzzle threads 12mm long so that gives a total of 100mm over the barrel.

Originally Posted by DPT

Yes we can do that, we don't charge to machine out the bush, only freight charge. The correct measurement is 88mm back from the thread shoulder, we normally do the muzzle threads 12mm long so that gives a total of 100mm over the barrel.

Are you sure about that DPT?

Originally Posted by BRADS

Are you sure about that DPT?

Sure about what Brad? We charge to thread a gun barrel but we don't charge extra to machine out the rear bush if we supply one of our suppressors but don't fit it or if someone is ordering a bush on its own

Originally Posted by DPT

Sure about what Brad? We charge to thread a gun barrel but we don't charge extra to machine out the rear bush if we supply one of our suppressors but don't fit it or if someone is ordering a bush on its own

If I order a bush on its own I only pay freight?

Originally Posted by BRADS

If I order a bush on its own I only pay freight?

Sorry the reply to that question was regarding machining out the bush, not for purchasing a bush
If you are to purchase a bush its $15, I don't charge extra to machine out the bush.

Originally Posted by DPT

Yes we can do that, we don't charge to machine out the bush, only freight charge. The correct measurement is 88mm back from the thread shoulder, we normally do the muzzle threads 12mm long so that gives a total of 100mm over the barrel.

@DPT all good mate will do it that way then I seem to be getting all sorts of measurements out of my callipers lol with a tolerance of 2mm lol so ill take the two rifles down to the local engineer and get him to take the measurements he has much better gear than I do