Thread: LabRadar?

Originally Posted by Plinky

Wow, good job. Wish I could drive one of those machines. I’ll take one too please if there’s one available.

Real easy. I find CAD programs a steep learning curve.

Originally Posted by quentin

And if there are still any available, put me down for one too.

Done.

If there is any left can I please grab one?

Originally Posted by Nibblet

Real easy. I find CAD programs a steep learning curve.


Done.

Just use Google sketch up and down load a .stl file converter plug in.
Probably not as precise as a proper CAD program, but for something like that more than accurate enough.
I designed a replacement Tikka magazine follower in Sketch up and it turned out mint.

Originally Posted by Beetroot

Just use Google sketch up and down load a .stl file converter plug in.
Probably not as precise as a proper CAD program, but for something like that more than accurate enough.
I designed a replacement Tikka magazine follower in Sketch up and it turned out mint.

Yup that's what I'm using.
They're precise, some of the prints are accurate to less than 0.1mm.
This block is meant to be 40mm


Sent from my SM-G930V using Tapatalk

Originally Posted by Nibblet

Yup that's what I'm using.
They're precise, some of the prints are accurate to less than 0.1mm.
This block is meant to be 40mm


Sent from my SM-G930V using Tapatalk

Looks good, the accuracy of the prints I had done was similar to that.
What printer has you got?

Originally Posted by Beetroot

Looks good, the accuracy of the prints I had done was similar to that.
What printer has you got?

Flash forge creator pro

Sent from my SM-G930V using Tapatalk

My apologies guys, I've been super useless as of late. Could rattle off some excuses but I'm just lazy and hate going to the post office.

However, they're on route to @BRADS so if you're still keen can you please PM him with your address etc so he can sort out payment and do one trip to the post office.

Cheers, and sorry for the delay.
@muzr257 @Kiwi Greg @duckdog @rupert @Plinky @quentin @HUNTY

It’s us that should be thanking you, so thanks for taking the time to print them and sending them. I’ll pm brads.

Hey guys sorry for the delay been busy these where all posted today, you should see them next week
Cheers

Sent from my SM-G950F using Tapatalk

Originally Posted by BRADS

Hey guys sorry for the delay been busy these where all posted today, you should see them next week
Cheers

Sent from my SM-G950F using Tapatalk

Thanks @BRADS will make sure I buy you and @Nibblet a beer or two if I ever get the chance to meet either or both of you.

I'll be keen as to see a photo, if they work haha

Any chance I can grab am aiming device for my labradar?

Originally Posted by R93

There are a few threads on the radar already.

But fair to say there isint a better chrony on the market.

Sent from my SM-G965F using Tapatalk

Rod and Rifle did a review on it. It doesn't work well with Suppressors. Doesn't work well on a range with other shooting stations within 2m, doesn't work with FMJ or cast bullets reliably. Also eats batteries and harder to setup

Originally Posted by scottrods

Rod and Rifle did a review on it. It doesn't work well with Suppressors. Doesn't work well on a range with other shooting stations within 2m, doesn't work with FMJ or cast bullets reliably. Also eats batteries and harder to setup

Well that's a load of shit regarding suppressors


Sent from my iPhone using Tapatalk

Probably why I would never waste my money on a rod and rifle magazine. (or any hunting related magazine)

All I can say regarding every issue you say they have printed, is it is utter bullshit and who ever did the review is either an idiot or has another agenda.
Maybe they had a faulty unit but were too dumb to work it out?


Think about what they said about FMJ projectiles and then how a radar works for a minute, and then get back to us


Sent from my SM-G965F using Tapatalk