Thread: Leupold Turret Help

Originally Posted by Roarless20

@SikaHuntaa

The ball bearing in the hole idea didn't work on my cap as the existing hole is nowhere near '0'.

I used a 1.5mm drill bit to drill the hole and then cut off the shank end of the same bit to be the pin.
Next time i would angle my pin hole slightly away from the grub screw as my pin just barely touches the side of the grub screw and makes it hard to turn. Also i would drill it 3 index marks above '0' instead of only 2.
The pin just floats snug in the hole and doesn't need gluing in place.

Attachment 215434
Attachment 215435
Attachment 215436

Awesome thanks for that mate, I will give it a shot