Printable View
Mate has one of these in 7mm Blaser mag.
Components are ridiculous.
Maybe he's better off rechambering to 7mmrm or rebbareling to 300wm or 300wsm.
Tenon thread is 1 1/16"x16 tpi.
Is this "same as Tikka" thread ? In order to rebbarel at reasonable cost?
Ta
Should be same as Reminton 700
Sent from my SM-S906E using Tapatalk
Yes I thought they were same as REM700 for tenon thread. He might be better off going 7mmPRC once brass is available here.
ah yep good ideaQuote:
Originally Posted by chainsaw
You could buy a tikka rem mag and keep hunting for the $$$$ the whole changeover is going to cost him
Park the lone peak up and use rem mag until blaser mag components are found
Then sell rem mag tikka
No disruption to his hunting then
I’m often shooting sika 1100-1200 yrds with the rem mag so the 7blaser park up won’t hurt his hunting success during the wait time
Yep have thought those options thru- along with shouldajustboughtafuckentikka300bro :)Quote:
Originally Posted by 7mmsaum
I'm about list my 6.5 prc tikka if your interestedQuote:
Originally Posted by ANTSMAN
Sent from my SM-S906E using Tapatalk
Quote:
Originally Posted by BRADS
There’s another great option and well worth considering
Theirs bugger all you can rechamber the blaser to its a fatter case than the rm
The gunsmithing costs / costs of selling and buying something else probably isn't worth it.
What is there that is more expensive than more common cartridge's? Dies and brass?
Its probably not a rifle youre going to go blast 50 goats with in a weekend.
So I reckon it be better just adding enough brass to the stables for the life of the barrel especially if he already has dies. Problem solved.
I have a 7mm blaser mag improved
I have a 162 ELDX doing an easy 3000 fps
The cases get like 15 loads easy as...although I do anneal them each time
I suspect the real problem is people loading up to the absolute max and getting minimum case life
Back the loads off....can only kill a deer once
you will get way better case life
Nah thanks mate, I doubt he'd be keen. Probably he'll just bite the bullet and buy the 12$ each brass and live with the heavy long Canon:)Quote:
Originally Posted by BRADS
Oofff. I can see why you're considering your options at 12 bucks each.
Who’s selling it for that geZz @Echo I ran mine at 3060with 175 eldx 180 vld and eldms and it was very conservative not improved version it’s a unreal cartridge shame about the lack of brass best 7mm iv owned for roar power flat shooting with a humble 68gns of powder
At that price from brass, I would get it chambered in 7rm and carry on till 7 prc becomes popular enough that components and ammo are in most local shops. Then consider rechambering or rebarreling depending on rounds counts.
Rechambers aren't an option to the above the blasers to fatQuote:
Originally Posted by Friwi
My bad , I felt to properly read the beginning where he has already the rifle in that caliber.
28 nosler could be the next approach
Potentially 7lrm? I'd store it as a blaser barrel before going the 28nos
Maybe you could push some 300 prc brass through the blaser die, trim and neck turn and be good to go?
A long and fastidious process.