Making a light rifle, lighter
I have recently picked up a kimber hunter in 6.5 creed with the intent of building a lightweight carry rifle that is still good to 400 odd. I love the 284 tikka but with the 20moa rail, rings, bipod adapter vx5 and can she is still pretty heavy and better suited to being slung than in hand.
Came across a thread on a Yankee forum about the hunter stocks being loaded with a heavy rubberised material for sound deadening. Thought I would post the process here for anyone wtih the same rifle can save an easy 250-300 grams.
Whip the recoil pad off(2 screws) and wind the rear sling stud out. You will see the goo. Using a long flat head screw driver work the sides away from the stock and feed a bit of oil in to loosen it up. Should all pull away pretty easily. Once you've got right round and loosened it run an auger into the rubber a couple inches then give it a good tug. Should pop out in one piece. You then romove the cap on the pistol grip and there is a chunk more in there, this slides out a bit easier. I stuffed a bit of lightweight foam (pool noodle stuff) in there to serve as sound deadening. Then throw it back together. Bam 250-300 grams lighter. Whole job takes 15 minutes
Finished rifle with dpt and vx3 1.75 - 6 is 2.77 kg almost a full kg lighter than the tikka or my bergara.
I should be able to achieve close to 2700 with 130 eldms which will get me grunt out further that I would want to shoot it.
Has a stripped/seized action screw so I might get it sent in to be removed and matching the bolt handle for a few extra grams. https://uploads.tapatalk-cdn.com/202...a2e67580c1.jpghttps://uploads.tapatalk-cdn.com/202...e3d501faaf.jpg
Sent from my CLT-L09 using Tapatalk
