Anyone have one? Mint rifle?
Printable View
Anyone have one? Mint rifle?
I have one. Don't particularly enjoy it. Dropped it in a laminate stock which helped the balance and appearance, but I'm still not thrilled with it by any means.
Trigger is a poor imitation of the accutrigger. Action is a little clunky.
Doesn't like winchester ammo - won't eject casings from powerpoints and crushes the hollow points on the 40gr subs when chambering.
Tried a variety of ammo and have ended up on CCI subs, but it's still not particularly accurate. 20-25mm at 50y, from memory. (have a few recent targets at home that I can check tomorrow night)
Often think about selling it and picking up a savage or something instead.
Just my experience, I'm sure others will have differing opinions.
Hehe, I've got the opposite experience. Got one, picked it up from Serious Shooters about a year ago - my last purchase from them ever but that's a different story :D
After much ammo testing, have stuck with CCI SV as they shoot perfectly and very accurately for me. Had some horrible results from a lot of stuff, including T22, Federal and SK STandard Plus. I shoot metallic silhouettes with it, I've lightened the trigger to 2.1lbs, shoot targets at 40m, 60m, 75m and rams at 100m. Ram target is the size of your hand, so if I can hit that, from a standing position with no slings, etc with CCI standards, that'll do me.
http://iforce.co.nz/i/t2i3mwvg.pbw.jpg
http://iforce.co.nz/i/jwsxyic1.jfa.jpg
25 yards off a front rest only.
http://iforce.co.nz/i/q2d5zadh.c3p.jpg
http://iforce.co.nz/i/gy3aj0bs.rpz.jpg
Rams at 100m for metallic sils just to put things into perspective - it can knock them over when I do my part.
Wishing I had one, I got both my marlin .22 and 917vr just before the released the xt series, they shoot very straight for me, only run CCI through them, only thing I wish I could do easily was adjust the trigger pull, can't be bothered trying to change to the tx will just lump it
That is a very easy fix! Only takes a few minutes to change the worst offender, the trigger return spring, with a doner from a pen.Quote:
Originally Posted by Survy
Cool. I'm thinking of picking one up after seeing Serious Shooters is doing them for $300 bare (I don't care for the junk in 22 packages). I would like to set it up for LR .22 shooting, nothing like trying to hit steel plates at 150 - 300 yds on a windy day.
Same package I had from SS. My one is running a Mueller APV from Digit, although at 100m on a ram 14x is barely suitable, must upgrade to something with target turrets one day.
I've got an XT22 with full barrel supressor.
My experience with 40g Winchester subs in this rifle is exactly as StrikerNZ described. I was stuck with 500 rounds, so now that they are gone I'm trying the 42g subs from Winchester, 38g Subs from Remmington and the CCI subsonics in 50/100 packs.
Would probably stick with the CCI's except they are really hard to find in CHCH right now.
Marlin XT-22R | Trade Me
^ Is there much (any) difference between XT22 and XT22R?
Whats the difference besides the trigger compared to the 25N?
The stock has moulded in plastic sling swivels too.Quote:
Originally Posted by Toby
I have a Mueller Tac II which I also got from Digit, which it will probably wear. I'm thinking of buying an airsoft "sniper rifle" and converting it into a stock for the Marlin. Maybe an L96.Quote:
Originally Posted by Kscott
Very tempted GM had a look online for a how too, but its me and knowing me I would stuff it up some how. :XD:Quote:
Originally Posted by gadgetman
I am thinking about taping the trigger completely down while gun is in the safe hoping to "stretch" it out and loosen it a bit, does anyone know if this would actually work .?????
( FYI ) hunting and fishing got scoped package of the .22xt $399
That's what made my buy the model prior to the XT moulded sling just didn't look right to meQuote:
Originally Posted by gadgetman
Kscott, that first pic of yours with the weather info, is that a smartphone app ?
Re your scope, have a look at the Tasco Varmint 6-24, got one on an Omark, thinking that I would bin it, I've been pleasantly surprised by it.
Just take the old spring out and put the right sized pen spring in. If you screw it up you can always put the factory spring back in or try another pen. With the Marlin semi, which tends to have the same or better accuracy because of the free floated barrel maybe, you just pinch a shutter spring from a 3.5" floppy.Quote:
Originally Posted by Survy
+1
Survy, it's piss easy, reversible, just take a deep breath and do it
If you get stuck, post a pic and either gadget or myself will get you sorted.
Can you post a pic of which spring it is?
I did mine ages ago and although it made the creep smoother the pull part to make it fire is still just as hard. I forgot the term sorry
Marlin T-900 Trigger re-work (917v and similar rifles)Quote:
Originally Posted by Toby
I only did the trigger return spring on mine as that was enough.
I will do that. The stiffening of the sear spring
Just got back from the range with mine. Shoots great. Broke the front "swivel" using a bipod. Has ejection issue. Ejects 5/10.
What ammo are you using?
We will have the xtr22r synthetic as the bolt action .22lr rifle we hire out.
very decent for the price. Solid built and reliable. you can't go wrong with them.
[QUOTE=Toby;141149]What ammo are you using?[/QUOTEAA
Cci and rimunton. Looks like i got a remlin. The rear site was so far on the piss it was comical. How can shit like that pass QC?
CEO: "Whats QC?"Quote:
Originally Posted by Beavis
haha thats how
My gun hates Remington but loves Winchester, Have a go and see if that makes a difference.