Printable View
Thought I might have a crack at making a stock. Have some Matai well aged.Is this going to be suitable stock material?
Its hard, straight grained ,splits nice and straight and burns good and hot:thumbsup: and thats the extent of my knowledge on this timber.
Its nice hard wood + easy to work so could be ok. I would tend to mill a rough inlet into some and see how solid the sides are + maybe try and chequer a panel before investing a lot of time into it.
You could call Stock Doctor Kevin Gaskill or Bryn (?) from Targex and ask their opinions
Quote:
Originally Posted by veitnamcam
Matai is a nice wood that will look great but I'd be a bit worried about this characteristic.
I'd stick with Walnut it's tried and true.
Splitting was my main concern along with warping tho cant see why it would be any worse than walnut regarding warping.
Didnt they use it as floor boards and table tops in the good old days? I know they used Rimu and that is quite soft in comparison.
Surely with a well aged un split bit it would take some serious abuse to split it?
Matai should be fine
Thats what I wanted to hear, are you some kind of wood geek?. IE Know more about wood than how it goes in the fire :D
I know nothing about stocks but have used matai flooring by the hundreds of meters. Was impressed with it's strength and finish . The finish looked a bit like oak .
Good enough for me, Its only a bit of wood and a shit load of time:yaeh am not durnk:
One last question.
Am I better to use heart or out a bit? gonna get it flitched its in thirds at the mo and was about 1.6m dia
I've repaired a few matai floors and Dad is a chippie from way back (he's 81 now) so he has plenty experience with native timbers.Quote:
Originally Posted by veitnamcam
If it fails you can always buy the stock blank I'm selling on trademe ;)
Use the heart, it will look a much nicer stock when finished and give it some real character. Some of the hard woods people talk about splitting split because of the resin still within them, if it has been aged and dried slowly it should be ok but it is typical of some of the natives to split after being worked due to the air getting in to areas with more resin and drying it quickly etc. Some timbers were kept in streams for a few months before being carved to draw out resin and avoid the finished product splitting after completion
I have some pieces of tiger grained Iron bark I would love to do a stock with, would be heavy though and pretty hard on the tool edges....
Cheers horihunter
I have very old Matai floors in my house, borer love it. I would be worried using it for a full bore gun stock if it splits easily.
Made a shelf from some of this flooring once, and coated it with polyurethane varnish. The varnish bubbled and blistered overnight. Paint shop told me that it was similar to Totara to finish, and needed special Totara primers to stop the blistering. No clear primers were available. Solved the problem by applying the varnish and sanding it back to bare wood between coats. Took about 6 coats to stop the blistering but the finish was never that good. It is a bathroom shelf and water has damaged the finish and stained or bleached the Matai.. In WW2 the government did research into replacement wood for walnut stocked .303 rifles. It's on the www somewhere, but it is a long time since I read it. I think their second choice after Walnut was Southland Beech.
Barefoot you never really answered the question. Are you a wood geek or not?Quote:
Originally Posted by Barefoot
Welcome to the forum Mobyduck.Quote:
Originally Posted by Moby Duck
VC did you have a crack at making that stock ?
Yea um its still sitting on the smoko table half inletted :DQuote:
Originally Posted by Munsey
Must get round to that.
Attachment 14417
Sent from my GT-S5360T using Tapatalk 2
Looks sweet as is :P should have added that to the Sako sale, Happy may have doubled his offer!!
Uuumm can't remember what. I was gonna say to that Gibo. Oh was actually hoping it would get the thing movingQuote:
Originally Posted by Gibo
No intention for it to stop there but it just did VC will be first to hear if it ever goes back on the market bro.. :thumbsup:
From one GC to another GC. Well done :)Quote:
Originally Posted by Happy
