Thread: Micro actions what's out there.

Looking around for 6x45 or 6x47 conversions, what rifles fit the following criteria.

Blued or stainless action - must be micro sized (prefer not 08 case size) not fussed about control fed
Box mag (drop plate) or flush mag fit
Under 6 pounds bare
Low bolt lift
Synthetic stock - good quality ie sako, forbes end quality stock from factory or ability to fit aftermarket easily.

Talk to Kiwi Greg at Terminator Products, get him to import a Stolle/Panda action

The ultimate would be a 7x 58 with a .540 base dia

I'm not sure I would bother with a 6x45 or 6x47


But I have a Sako A1 in .223 in a Tikka T3 STUG stock with 18" slightly heavy barrel which weighs 2.3kg

CZ527 , zastava mini mauser , sako and the new Howa mini action which looks all good.

Browning micro a-bolt?

Howa mini doesn't have a flush fit mag unfortunately, don't think the CZ527 does either.

I've got a cz 527 atm , it has high bolt lift, I've had the 3 shot mag fitted and the trigger guard machined down so it's flush enough. But stock options are also limited.

Mate has a kimber Montana he had rebarreled in 6x47 it's an awesome little rifle only problem is he won't sell it to me..

Gimp, how does that go about fitting the tikka stock? Ie T3's are LA but that sako is short?
@camo wsm yea that's one option I'm looking closely at, but again thats 08 sized action.

@Timmay when I made the stock for Gimp I inletted it specially for his Sako A1. I have a mold for a CZ527 stock.

Originally Posted by Timmay

Gimp, how does that go about fitting the tikka stock? Ie T3's are LA but that sako is short?
@camo wsm yea that's one option I'm looking closely at, but again thats 08 sized action.

It is an 08 size in terms of bolt face but definitely smaller than a one size fits all tikka or rem short action etc and you will need that sized bolt face anyway, plus the mag size is perfect for that case..

Originally Posted by stug

@Timmay when I made the stock for Gimp I inletted it specially for his Sako A1. I have a mold for a CZ527 stock.

Oh so are you THE stug guy?

What's the cost for a cz? Pm me if you like.

Tell your mate to sell it to me? Maybe he doesn't like ya lol

Originally Posted by JoshC

Browning micro a-bolt?

This would fit the bill as long as the internal mag length is about 60-62mm, then you could look at 6x45, 6x47 or 6mm204. Make a nice wee gun in one of those, 60 deg bolt lift etc etc.

Buy happys blaser? No turn bolt
And get some barrels and swap when ever you like