Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Terminator Ammo Direct


User Tag List

+ Reply to Thread
Results 1 to 11 of 11
Like Tree6Likes
  • 1 Post By Bill999
  • 2 Post By Bobba
  • 2 Post By Seventenths
  • 1 Post By Kelton

Thread: Model 7, 7mm08 - new barrel?

  1. #1
    Member Louie's Avatar
    Join Date
    Apr 2019
    Location
    Taranaki
    Posts
    151

    Model 7, 7mm08 - new barrel?

    I've had this old model 7 for 5 years now. It was used when I bought it and after some decent troubleshooting with the stock, scopes and ammo have decided it's time for a new barrel.

    Can someone please point me in the right direction to find a new/near new replacement? Is the process of changing calibre a major or worth consideration?

    Name:  2.jpeg
Views: 382
Size:  3.38 MB

  2. #2
    Member
    Join Date
    May 2012
    Location
    Far North
    Posts
    4,874
    708 is a fine cal but you do have the choice of 308,6.5creed,243,260 and any others that pop up in the time you are looking that are based on the 308 family case

    its cost me roughly 100ish for a fitting in the past, and about 150ish upwards for a new take off barrel

    often the cal stamp doesnt line up so be prepaired for that

    why do you think the barrel you have is poked out of interest?
    Id cut it short as fuck first if it is a throw away and see if its any better accuraccy wise. its gone both ways for me in the past, both more and less accurate on different rifles
    Louie likes this.

  3. #3
    Member Bobba's Avatar
    Join Date
    May 2018
    Location
    Ngaruawahia
    Posts
    1,296
    Any choice from the 308 family will fit straight in. 308 is probably your best choice based on current ammo availability.

    Second hand barrel $100 to $300 plus $100ish for fitting.

    New barrel fitted $1000
    dannyb and Louie like this.

  4. #4
    Member Louie's Avatar
    Join Date
    Apr 2019
    Location
    Taranaki
    Posts
    151
    Quote Originally Posted by Bill999 View Post
    708 is a fine cal but you do have the choice of 308,6.5creed,243,260 and any others that pop up in the time you are looking that are based on the 308 family case

    its cost me roughly 100ish for a fitting in the past, and about 150ish upwards for a new take off barrel

    often the cal stamp doesnt line up so be prepaired for that

    why do you think the barrel you have is poked out of interest?
    Id cut it short as fuck first if it is a throw away and see if its any better accuraccy wise. its gone both ways for me in the past, both more and less accurate on different rifles
    Cheers bill, i might cut it back a bit further to see if that provides any improvement. I've struggled to get a good group out of it no matter what i did and have cut it down to its current length, the rifling appeared to be worn at the crown.

  5. #5
    Member
    Join Date
    Oct 2014
    Location
    Napier
    Posts
    1,147
    Your local guy Jeff Horn can sort this out for you.

  6. #6
    Member Louie's Avatar
    Join Date
    Apr 2019
    Location
    Taranaki
    Posts
    151
    Quote Originally Posted by Bobba View Post
    Any choice from the 308 family will fit straight in. 308 is probably your best choice based on current ammo availability.

    Second hand barrel $100 to $300 plus $100ish for fitting.

    New barrel fitted $1000
    any advice on where's best find find new/used barrels?

  7. #7
    Member
    Join Date
    May 2012
    Location
    Far North
    Posts
    4,874
    Quote Originally Posted by Louie View Post
    Cheers bill, i might cut it back a bit further to see if that provides any improvement. I've struggled to get a good group out of it no matter what i did and have cut it down to its current length, the rifling appeared to be worn at the crown.
    if its just the crown then a few inchs might do the trick
    there are little gauges that will tell if the bore is worn if you get a local gunsmith to have a quick look
    I had my brno counterbored to maintain the front sight back before I came around to short barrels as there was wear at the muzzle end
    it improved the accuraccy

    trademe is a good place to find second hand barrels
    try get a brand new take off barrel if you can then its at least brand new and they go for basically the same price as a used one
    people are still taking them off all the time to build custom guns
    I believe rem700 barrels have the same thread but a slightly thicker profile but im no rem expert so best to confirm that
    you would need to sand the barrel channel out a little and re-varnish it is all

  8. #8
    Member
    Join Date
    Aug 2014
    Location
    Palmerston North
    Posts
    937
    Have a 7mm08 barrel off of a tikka you can buy if your willing to try make that fit XD

  9. #9
    Banned
    Join Date
    Jun 2015
    Location
    christchurch
    Posts
    17,992
    why not try just a re crown first, then chop 2-3" off if that dont work

  10. #10
    Member
    Join Date
    Dec 2011
    Location
    Clutha
    Posts
    1,416
    That rifle doesn’t look like it’s been used alot.

    I had a rifle that I didn’t think was shooting right as it had a shit tonne of rounds down it…. I had it bedded as I thought the wood stock was warped as it had been on a few rainy trips, nope… still wasn’t grouping so I had the barrel cut back 2 inches as I thought the crown was out.

    Nope, still wasn’t grouping so I thought I’d sell it for a new rifle and was stripping it when I discovered the front scope mount screw was loose…. I tightened the screw and kicked myself after shooting a nice tight group ������

    If your after a new barrel, ring around and see if gunworks or even gun city Christchurch have anything.
    Bill999 and Louie like this.

  11. #11
    Member
    Join Date
    Apr 2019
    Location
    Wanganui
    Posts
    3,250
    Easy done call trueflight they can turn one down to suit in any .473 short action calibre you desire then get hold of Blair Ford at close quarters cerokote to colour match it his work is world class
    25/08 IMP likes this.

 

 

Similar Threads

  1. Model 7, 7mm08 vs Spiker
    By craigc in forum The Magazine
    Replies: 25
    Last Post: 31-12-2021, 10:03 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!