Thread: The model 7 in your life

This is my little model 7

Got it from remmodel7 off here.
7mm08
It had a 18" barrel.

However I've since: shortened the barrel to 16" and added a spacer for my lanky arms.

Burris SixX 2-12x40, my DPT can off my 308. Warne rings and mounts.

And for a bush rifle that can reach out on clearings.

I'd say that group is more than enough.

Love that little rifle its such a cute wee thing.

Basically bought it as a rough and tumble dont care if I scratch it in crap bush type of rifle.

Originally Posted by Rock river arms hunter

Attachment 153791Attachment 153792

This is my little model 7

Got it from remmodel7 off here.
7mm08
It had a 18" barrel.

However I've since: shortened the barrel to 16" and added a spacer for my lanky arms.

Burris SixX 2-12x40, my DPT can off my 308. Warne rings and mounts.

And for a bush rifle that can reach out on clearings.

I'd say that group is more than enough.

Love that little rifle its such a cute wee thing.

Basically bought it as a rough and tumble dont care if I scratch it in crap bush type of rifle.

Nice! That will work just fine! What bullet are you running in it?

I have a similar mod 7 7mm08, it was a cheap trademe purchase. When it arrived i was a bit dissapointed in its condition, it was pretty scruffy to be fair. A rough as guts pig hunter had had it and it was quite knocked about.

The alloy trigger guard was squashed flat.
A suppressor had been left on for an ectended period of time and there was some bad corrosion and pitting on the exterior of the barrel. A barrel chop to 15 inch removed nearly all of it.

The stock was very knocked about too. But i fitted another stock i had lying about.

And heres the result. Its now a bloody neat wee gun. Its balanced really nicely and easy to maneuver in the tight stuff.

Im running 140 NBTs at 2700 fps with CFE223 which is pretty good medicine for close to med range hunting.

I shot a fallow at 270 yards with it just over a month ago. And I'd be happy to push it to 400 yds if i had too.

Sent from my SM-G930P using Tapatalk

Originally Posted by GWH

Nice! That will work just fine! What bullet are you running in it?

I have a similar mod 7 7mm08, it was a cheap trademe purchase. When it arrived i was a bit dissapointed in its condition, it was pretty scruffy to be fair. A rough as guts pig hunter had had it and it was quite knocked about.

The alloy trigger guard was squashed flat.
A suppressor had been left on for an ectended period of time and there was some bad corrosion and pitting on the exterior of the barrel. A barrel chop to 15 inch removed nearly all of it.

The stock was very knocked about too. But i fitted another stock i had lying about.

And heres the result. Its now a bloody neat wee gun. Its balanced really nicely and easy to maneuver in the tight stuff.

Im running 140 NBTs at 2700 fps with CFE223 which is pretty good medicine for close to med range hunting.

I shot a fallow at 270 yards with it just over a month ago. And I'd be happy to push it to 400 yds if i had too.

Sent from my SM-G930P using Tapatalk

I run the 160gr TMK at 2430fps

In going off the theory of a softer heavier weighted bullet with a higher BC. I want to blood something with it haha

Originally Posted by Rock river arms hunter

I run the 160gr TMK at 2430fps

In going off the theory of a softer heavier weighted bullet with a higher BC. I want to blood something with it haha

Its a good theory mate, same reason i run 162 Amax in my 17" 284.