Mounting a Sightron S111 6-24x50 to a rem 700

so..

I have just got a Sightron S111 6-24x50 to mount on a remington 700 7mm rem mag, but im wondering what mounts\rings to use...

Its a rifle i carry all over the place so keen to keep weight under control, so was thinking some talley one piece base\ring combo but unsure if they will be strong enough to hold this heavy scope on my bang stick.. Also anyone know if medium height ones would work as want to keep it as low as possible..

I could go to the rail and ring system but really not sure if i need to !

thoughts, help ?

Interesting choice of scope if you are wanting to keep weight down. Honestly cast iron rings and a uranium rail would make bugger all difference now. I could cheekily suggest a couple of helium filled balloons but that would just be silly.

Medium rings on a rail will work fine.

Like Marty said, at this stage the weight 'savings' will be unnoticed.

Yip, i know im fighting the weight card with that scope but they just seem such a great option for the price... Take your point that there is not much in it really weight wise, might do some math on the weight figures via the net..

They're definitely good scopes for the money, I've had a few.
What's your intended purpose for the rifle?

Rifle is my open tops and south island rig really.. looking to get out 600m with it. Scope maybe a bit over kill but will use it for now and see how it goes...

I've got a game reaper on my tikka good solid 1 piece mount

Attachment 57167

This is one mounted on my old ftr rig.

Rings are Burris XTR mediums on savage bases above a very thick 1 inch barrel. As you can see there's heaps of room.

cheers Nibblet, that looks great !

I had a Sightron on my rem 700 for a while. Used medium Talley rings and they fit fine. The only issue I had was the turret would occasionally hit the brass coming out and leave it in the action

They are strong enough and held zero well but if you want to be sure epoxy the bases down once your happy

4-16 magnification would be far better for the ranges your shooting to and don't weigh nearly as much as a 6-24.... I think if you have one round in that mag it may save some weight, no bolt would also help along with a magazine or a trigger and guard but then it may not work as intended lol

http://uploads.tapatalk-cdn.com/2016...fe00d07f9a.jpg iv got talley lows on mine and can still dial way over 1000yards


Sent from my iPhone using Tapatalk

I glued mine on and used tool that gun works sell to align them and also laped them afterwards


Sent from my iPhone using Tapatalk

Awesome, thanks dirtyface.. That also is a very nice looking rig !

I will try some talley lows and mediums to see which works best for me, will also glue and lap them. Do you have the same ejection issue as mentioned by RWT at all ?

Nah never had that problem


Sent from my iPhone using Tapatalk

Saw tthe problem with ejected cases demonstrated on youtube (of course!) Can't recall the rifle or the scope, but he solved it by screwimake enogh ng the cap onto the turret, then bevelled the bottom edge of the cap with a file. Looked ugly as 2 dogs fucking, but it worked, and no, he didn't go right through and make a hole. But it DID create enough clearance for the cases to eject without deflecting back into the port.

Quote:

---

Originally Posted by Nibblet

Attachment 57167

This is one mounted on my old ftr rig.

Rings are Burris XTR mediums on savage bases above a very thick 1 inch barrel. As you can see there's heaps of room.

---

What is the stock called?

Quote:

---

Originally Posted by Whanganui

What is the stock called?

---

Choate ultimate sniper or something similar.
Personally wasn't the biggest fan of it.

Quote:

---

Originally Posted by spnz

Awesome, thanks dirtyface.. That also is a very nice looking rig !

I will try some talley lows and mediums to see which works best for me, will also glue and lap them. Do you have the same ejection issue as mentioned by RWT at all ?

---

Come to think of it I may have had lows as well. Now have the 34mm talleys with no problems.

Heres the only pic I could find with the old scope. Attachment 57293

If you do look at the rail ring option I have a set of Burris XTR 30mm Medium rings for sale. Not the lightest but they are ally so it's not terrible.

Ive got the same set up rem 700 and 6-24 sightron Ive put a egw rail and night force rings med
Scopes perfect for long range glass is clear and dials perfectly.
I can remove scope and stick in pack for rough travel keeps zero when fitted back on.
And makes rifle easy to carry.