Necessity is mother of invention.

Made up a .45 calibre inserts dohicky so I can boresight my hefalump gun again. Half inch coach bolt,nearly right size and with careful grinding off the thread it's a nice snug fit.cut head of bolt so boresighter can slide on a yip works a treat...now it's ballpark close will check on paper.oldschool boresighting didn't work as amount I can see through a 45 calibre hole out at thirty yards is rather big lol. Should be ok for bailed pig or possum up tree as long as I keep eyes open not shut in flinch...sook

I assume were talking 45-70, not going to be much possum left for the dogs to fight over!

Yes indeed. Works rather emphatically lol

Knock the primer out of an empty case works well too

Quote:

---

Originally Posted by csmiffy

Knock the primer out of an empty case works well too

---

That's what I'd do makes a fine peep sight

Did it for my 416. Bloody big bore. Surprising how much difference there is when moving around boresighting.
Tried it without the case and had tonpay attention to how centered you looked down the barrel.
Looking through the primer was heaps better. Lined you up at the action end so only had to worry about the front

I’ve always found(in my case anyway), that “poverty” is the mother of invention!

You know something @BrownDog264 I have had that exact same thought more than once.i refuse to buy a new handle for hand tools.

Quote:

---

Originally Posted by Micky Duck

You know something @BrownDog264 I have had that exact same thought more than once.i refuse to buy a new handle for hand tools.

---

Given the shite quality these days of the timber used to make handles for axes/shovels/picks/rakes, I would say you are onto something ;)

Rake was purchased this past Autumn.


Attachment 260320

Mine the same mate , but worse .

whats wrong with that. its a left handed rake

Quote:

---

Originally Posted by Micky Duck

Made up a .45 calibre inserts dohicky so I can boresight my hefalump gun again. Half inch coach bolt,nearly right size and with careful grinding off the thread it's a nice snug fit.cut head of bolt so boresighter can slide on a yip works a treat...now it's ballpark close will check on paper.oldschool boresighting didn't work as amount I can see through a 45 calibre hole out at thirty yards is rather big lol. Should be ok for bailed pig or possum up tree as long as I keep eyes open not shut in flinch...sook

---

Meanwhile I'm a qualified fitter/turner who chambered the said 45-70 who could make anything you want. Why are you pissing around with old bolts and a grinder mate?

Cause I don't like to impose....your a busy man.

Quote:

---

Originally Posted by XR500

Rake was purchased this past Autumn.


Attachment 260320

---

next time you lean on it try putting it under the other shoulder, it may straighten out.