hi team,
mate dropped me a Norinco .22 bolt action.
the mags delivering the last 3 round with the tip of the bullet too high for the chamber to feed ie its sticking too far up.
any quick fixes/mods or is if buy and new one time?
Thanks
M
hi team,
mate dropped me a Norinco .22 bolt action.
the mags delivering the last 3 round with the tip of the bullet too high for the chamber to feed ie its sticking too far up.
any quick fixes/mods or is if buy and new one time?
Thanks
M
Addicted to gun powder
Just the tip bud
Addicted to gun powder
Clean it first, esp the inside of the back of the magazine, if that doesn't work, then tutu with the feed lips (close the front of the feed lips ever so slightly, like a tiny amount)
Identify your target beyond all doubt
I had that issue a while back and moving the mag higher actually got the bullet more lined up, push the mag higher and give it a shot.
If that doesn’t work try it in conjunction with queezing the front lips together a few thou, that may assist in holding down the nose of the bullet.
Shot team ill give it a whack tomorrow. Its a 5 shot, ive had norincos before no probs
Addicted to gun powder
difeerent 15s like diferent projectiles....one of mine hated power points but loved superspeeds... current one is fine with either.
I put up with this for 2 years. Bought a polymer cz452 mag. Problem solved, feeds perfect! Played around adjusting the lips on the original steel mag and works ok now. But make sure you only bend the lips i made the mistake trying to bend them and in the process bending in the body and the follower was getting jammed about the 3rd round.
Sent from my SM-N960F using Tapatalk
Bookmarks