Thread: Parker hale rings

Looking for a set of parker hale rals3 rings for a period correct restoration, already have the bases so far anyone has some let me know please.

Whats rals3? I have a set of 1" I think, somewhere.

I've seen a set that had that stamped on them. They have that round stud in the middle to lock into the cavity in the bases.

Originally Posted by Marty Henry

I've seen a set that had that stamped on them. They have that round stud in the middle to lock into the cavity in the bases.

I have a set stamped RALS 3 also weaver one sided mounts the ones that tighten on one side can text photo

I have no idea what rals3 is but these rings came off a Parker Hale I bought many years ago...as you can see they have the total neglect of years of living in a box of junk...somewhere I have probably got the scope that came with them...the three boxes of ammo that came with the rifle were priced in pounds/shillings/pence

Hi, just wondering if you still have these rings and whether you might consider selling them?
Are they 1inch tube or?
Thanks

Originally Posted by bushferretnz

Hi, just wondering if you still have these rings and whether you might consider selling them?
Are they 1inch tube or?
Thanks

I have a set of 1 inch send me your cell phone number and I can text a photo

Originally Posted by bushferretnz

Hi, just wondering if you still have these rings and whether you might consider selling them?
Are they 1inch tube or?
Thanks

I have found those rings as in post #4, they would clean up better than the photo implies....one thing I did notice is the wing nuts are left hand thread...who would have thought.

I now know what rals 3 is...I have a set...will put up photo just as soon as computer allows me too...stupid machine.

Found my set. Theyre in reasonsbly good nick but stamped RALS 4. They apoear to be black coated aluminium.

Originally Posted by Woody

Found my set. Theyre in reasonsbly good nick but stamped RALS 4. They apoear to be black coated aluminium.

Think that RALS4 is low 26mm.

Originally Posted by tetawa

Think that RALS4 is low 26mm.

Thats certainly possible. They were on an old rifle I bought a few years back; no scope on it, just rings and bases. However, when I retrieved them from storage tonight a thin shim came loose from inside one of the rings, so they very well may be 26mm as you suggest. ( I removed those rings and bases from the rifke at the time andcrepkacwd them eith steel weaver bases and rings for a leupold VXR illum tmr 3-9*40 scope.

The RAL S3 is 24mm (.94") in diameter.
The RAL S4 is 25.5mm (1.00") in diameter

Originally Posted by diana2

The RAL S3 is 24mm (.94") in diameter.
The RAL S4 is 25.5mm (1.00") in diameter

The RAL S3 is low 1". The RAL S4 is low 26mm. The RAH S3 is high 1". The RAH S4 is high 26mm. There is also a 7/8" models but don't know the codes.