Thread: IS THIS A QUALITY AR-15?

What do you think? never heard of Aero Precision.
Custom AR15 | Trade Me

Originally Posted by von tempsky fan

What do you think? never heard of Aero Precision.
Custom AR15 | Trade Me

I have got an AR with Aero Precision upper and lower - well happy. They make parts for the aerospace industry as well as uppers, lowers, mounts etc. Good quality kit

I thought they mainly did lowers and supplied others... but their website certainly has good looking full ARs:

http://aeroprecisionusa.com/

Aero AR15's seem to be fine ...
Check out this set up ... is the complete package for a good price
NEA AR15 - Bundle | Trade Me

Could be a bit heavy with that 20" barrel which looks like a fairly meaty profile ...

Cheers for the replies , seems like he has used quality components , might have to try do a deal for my Brno mod 1.

Yeah its a hvy barrel I think. That barrel if its what it is is $460US on Brownells alone. The stock is $300NZ.

http://www.brownells.com/rifle-parts...barrels,%20inc

Lots of good bits there, fairly close to my "dream" build for a long range gun, except I am using Bushmaster receivers. That must have cost quite a lot in parts.

The Q is why is it unfired, if I'd gone to that much time money and effort I'd want to be firing it.

Originally Posted by steven

Yeah its a hvy barrel I think. That barrel if its what it is is $460US on Brownells alone. The stock is $300NZ.

http://www.brownells.com/rifle-parts...barrels,%20inc

Lots of good bits there, fairly close to my "dream" build for a long range gun, except I am using Bushmaster receivers. That must have cost quite a lot in parts.

The Q is why is it unfired, if I'd gone to that much time money and effort I'd want to be firing it.

Yeah Steven, I thought the same - why hasn't he fired it and why no mag?

Originally Posted by steven

Yeah its a hvy barrel I think. That barrel if its what it is is $460US on Brownells alone. The stock is $300NZ.

http://www.brownells.com/rifle-parts...barrels,%20inc

Lots of good bits there, fairly close to my "dream" build for a long range gun, except I am using Bushmaster receivers. That must have cost quite a lot in parts.

The Q is why is it unfired, if I'd gone to that much time money and effort I'd want to be firing it.

Your on to it @steven

The number of second hand AR15 I looked at where the owner swears it had only fired 30 rounds ............ Bullshit!

I bough a new CMMG and fired 50 rounds in the first 30 mins I had it on the range.

My CMMG was also test fired at the factory.

Buyer Beware .... no one builds a Rifle like this and then does not at least test fire it to ensure if functions correctly.

Cheers
Pete

I have two lowers with Aero bottom ends.
Very happy with the fit and finish of them so much so I am looking at more.
I was looking at this rifle as well on Trade Me. Very Tempting.

It looks like a very nice rifle, areo parts are as good as you can get in my opinion

It's entirely possible then built it and didn't fire it

I'm going to have a look at it today ,is there anything I should be looking for in particular?

That the feed ramps on the barrel extension match the upper.

Sent from my XT535

Originally Posted by von tempsky fan

I'm going to have a look at it today ,is there anything I should be looking for in particular?

Standard M16 function checks