IS THIS A QUALITY AR-15?

What do you think? never heard of Aero Precision.
Custom AR15 | Trade Me

Quote:

---

Originally Posted by von tempsky fan

What do you think? never heard of Aero Precision.
Custom AR15 | Trade Me

---

I have got an AR with Aero Precision upper and lower - well happy. They make parts for the aerospace industry as well as uppers, lowers, mounts etc. Good quality kit

I thought they mainly did lowers and supplied others... but their website certainly has good looking full ARs:

http://aeroprecisionusa.com/

Aero AR15's seem to be fine ...
Check out this set up ... is the complete package for a good price
NEA AR15 - Bundle | Trade Me

Could be a bit heavy with that 20" barrel which looks like a fairly meaty profile ...

Cheers for the replies , seems like he has used quality components , might have to try do a deal for my Brno mod 1.

Yeah its a hvy barrel I think. That barrel if its what it is is $460US on Brownells alone. The stock is $300NZ.

http://www.brownells.com/rifle-parts...barrels,%20inc

Lots of good bits there, fairly close to my "dream" build for a long range gun, except I am using Bushmaster receivers. That must have cost quite a lot in parts.

The Q is why is it unfired, if I'd gone to that much time money and effort I'd want to be firing it.

Quote:

---

Originally Posted by steven

Yeah its a hvy barrel I think. That barrel if its what it is is $460US on Brownells alone. The stock is $300NZ.

http://www.brownells.com/rifle-parts...barrels,%20inc

Lots of good bits there, fairly close to my "dream" build for a long range gun, except I am using Bushmaster receivers. That must have cost quite a lot in parts.

The Q is why is it unfired, if I'd gone to that much time money and effort I'd want to be firing it.

---

Yeah Steven, I thought the same - why hasn't he fired it and why no mag?

Quote:

---

Originally Posted by steven

Yeah its a hvy barrel I think. That barrel if its what it is is $460US on Brownells alone. The stock is $300NZ.

http://www.brownells.com/rifle-parts...barrels,%20inc

Lots of good bits there, fairly close to my "dream" build for a long range gun, except I am using Bushmaster receivers. That must have cost quite a lot in parts.

The Q is why is it unfired, if I'd gone to that much time money and effort I'd want to be firing it.

---

Your on to it @steven :thumbsup:

The number of second hand AR15 I looked at where the owner swears it had only fired 30 rounds ............ Bullshit!

I bough a new CMMG and fired 50 rounds in the first 30 mins I had it on the range.

My CMMG was also test fired at the factory.

Buyer Beware .... no one builds a Rifle like this and then does not at least test fire it to ensure if functions correctly.

Cheers
Pete

I have two lowers with Aero bottom ends.
Very happy with the fit and finish of them so much so I am looking at more.
I was looking at this rifle as well on Trade Me. Very Tempting.

It looks like a very nice rifle, areo parts are as good as you can get in my opinion

It's entirely possible then built it and didn't fire it

I'm going to have a look at it today ,is there anything I should be looking for in particular?

That the feed ramps on the barrel extension match the upper.

Sent from my XT535

Quote:

---

Originally Posted by von tempsky fan

I'm going to have a look at it today ,is there anything I should be looking for in particular?

---

Standard M16 function checks