Rail and Rings for T3

Quote:

---

Originally Posted by Happy

Don't have a rail other Wise I would but using all mine The rings I have are not on a gun at present. So you'd still need to find 20 Moa rail

---

Ok cool mate. Will touch base once im ready to buy.

It might pay for me to get the rail sussed and hit a shop to try different rings to ensure my scope height is right

If it's 50 mm with low rings and egw rail it should be ok if it's 40 mm sometimes bit gappy to barrel. Let us know what you want for your rings cash wise when you ready. Talk to Reloaders David will tell you what rings to suit scope plus rail etc he seems to know off by heart

Quote:

---

Originally Posted by Happy

If it's 50 mm with low rings and egw rail it should be ok if it's 40 mm sometimes bit gappy to barrel. Let us know what you want for your rings cash wise when you ready. Talk to Reloaders David will tell you what rings to suit scope plus rail etc he seems to know off by heart

---

Cheers mate. Its a 44mm vortex.
Will pm ya when i have the optis off and ready to go

Sorry, thought you were asking, didn't realise you had it sorted.
My bad.

Quote:

---

Originally Posted by jakewire

Sorry, thought you were asking, didn't realise you had it sorted.
My bad.

---

No not sorted yet. Just going to sell the optis then purchase. Im useless at this so do most of it backwards :)

Check.:)

Quote:

---

Originally Posted by jakewire

Have you got this sorted Gibo
If not Waitaki Engineering make rails for the tikka and pairs of 30mm leupy pqr rings are easy to find at my place, even some Burris Custom turn ins with 0 and 10moa inserts, if you get the bases to fit, are about somewhere.
Also checked before I posted
Have a new pair of Burris 30mm Xtreme Tactical low that should give you enough if you go the 20 moa rail of whose ever manufacture.

---

Anyone got the contact details for Waitaki?? Cant find much with mr Google

Quote:

---

Originally Posted by Gibo

Anyone got the contact details for Waitaki?? Cant find much with mr Google

---

Waitaki Engineering Oamaru Area | Yellow® NZ Need driving lessons ? ;)

Saw that, was kinda hoping for a website to look at stuff. Cool as will call and see what a rails worth.

Quote:

---

Originally Posted by Gibo

Anyone got the contact details for Waitaki?? Cant find much with mr Google

---

034343419,
Mans name is Mark.

Cheers

Talked to Mark. Good guy :thumbsup:

Now what thread has my action got on it ??? :D

What year is it gibo? After 2005 it has a different thread to pre.
I can't remember which one is which, but think pre '05 has a thread pitch of 0.9mm
And post '05 had a pitch of 1mm.
Abe does know. He did mine and it's pre '05

Sent from my GT-I9300 using Tapatalk

Dont know mate, can i look the serial number up anywhere to check?