Thread: Re-barreling a WSM

Originally Posted by The Claw

Something based on WSM or SAUM or a single shot based on a RUM (i.e 338 Edge) would be the easiest. Or you could open it up to a .585 boltface (if that is an option with your action) and do something based off a 338LM case or a Norma Magnum case.

For me: easiest 7mmSAUM or a 7mm/300WSM (using Norma brass)
Then possibly: 338 Edge single shot
If opening it up: 7mm FatMax (I have to say that as I have one ) or a 338LM Improved variant, or if you are keen, a 338 Thor.

I wouldn't do a 6.5 WSM personally. Very hard on barrels from what I've heard...

Do you really think your 7mm FatMax is any beter in the barrel eating department????

Probably not much better, might get 1,000 rounds out of it. Thats plenty for a hunting rifle, lots of meat and practice (and hopefully) a few trophies in 1,000 rounds

I just ran the numbers thru my barrel life calculator, and there's about 15% more theoretical life with the Fatmax. Plenty of hunting barrel life in either chambering, but we've found the big 7mm's easier to get to shoot than the big 6.5's.
Greg

G'Day Fella's,

If it was for hunting purposes only, I'd just go with a stock standard 7mm WSM.

Hope that helps

Wishing you lot All the Very Best for 2012!!!
Homer

Originally Posted by Spanners

44 Minotaur ...

More info please

Originally Posted by Homer

G'Day Fella's,

If it was for hunting purposes only, I'd just go with a stock standard 7mm WSM.

Hope that helps

Homer

Yeah ya right Homer, the 7mm WSM is the coolest & best wsm cal & thats why I have one


and it sounds like Cyclist has been sniffing those pig shit fumes again

Originally Posted by Philipo

More info please

Pretty much 308 cut off at the shoulder and a 44 stuffed into it

Originally Posted by Spanners

Pretty much 308 cut off at the shoulder and a 44 stuffed into it

Tell us more Spanners.