Printable View
I'm wondering if anyone has had any success finding a replacement stock. I currently have a synthetic one, it leaves a bit to be desired.
I have seen the Victory precision 3D printed ones but am unsure of their quality and rigidity.
Any help welcome.
Flexing? The original stocks have a bad reputation of being a bit flexible and warping if left lying in the hot sun. They're also pressure bedded so free floating the barrel can stuff accuracy. I did it I know.
To fix it I bedded the action properly free floated the barrel channel and to give it some rigidity epoxied a fibreglass fence standard into a groove I cut. It's still my favorite 223. I had looked for replacement stocks but couldn't find anything mind you that was 12 or more years ago
Hey Marty, thanks for the reply. Yes it is flexing a lot. Barrel appears free floating, possibly needs to be re bedded and strengthened like you have mentioned.
there was a wood version that wasnt a bad stock at all, but the likelyhood of finding one is probably pretty low
Perhaps modify a CZ527 wood or laminated stock. I have seen a few around.
This was my fix
What in the name of everything holy is that made from. It looks as though it works but I'd really like a trigger guard.
Haha, yes that was it in build progress, it now has a trigger guard and fits a modified tikka mag. Butt end made from Paulownia and carbon and the forend is a polymer. Weighs next to nothing comparative to other AR styles
If you like wood, there is this if it fits... https://kellycountry.co.nz/products/...9ff25a88&_ss=r
that certainly looks like the genuine thing...same as mine. @Tiadog snap that one up quick
I got VTP to make a chassis system for my Zastava.
Attachment 245687
Attachment 245688
2nd pic is slightly larger length and diameter forend so my suppressor fitted in it.
Here's the link to the main core of the chassis. Then you can add whatever stock, grip, and forend you want.
https://www.vtp.co.nz/product/mcs-za...category_id=15
Brought it today and on its way. No way I'd ever have found that. Hopefully it fits.
What the feel and finish like to those stocks
pretty good,I stripped varnish off mine years ago and just oil it with the cleaning rag now...... I made a superlight stock for it but shoot far better with origonal wood jobbie.
Maybe your wearing it out?
Wooden stock arrived and action dropped in nicely. What have you guys found shoots well through your rifles? I've only tried a couple factory loads. Using corelockts at the moment. But not the most accurate.
Everything, just don't go over 62 grains bullet weight, they're a slow twist 1:12 from memory and won't stableise heavies. I used to hand load but the Belmont black 55 and 62 gave nothing away in accuracy and we're cheaper.
mine is a 1;10 got caught out as couldnt work out why other fellas were getting different/worse results. tight patch on cleaning rod will tell you what yours is.
biggest tip is only put 5 in mag not 6....they feed better.
50grn of pretty much any type should be your friend.
