Hey guys who has or has had a rossi puma lever as above?
Are they ok or crap.
Thinkin of one in 44mag or 357 mag for a bush cannon.
Printable View
Hey guys who has or has had a rossi puma lever as above?
Are they ok or crap.
Thinkin of one in 44mag or 357 mag for a bush cannon.
i have a 20" in 44 mag. love it. trigger/action was a little heavy until 30-40 rounds then smoothed up
I’ve had two in 44 magnum, a 16” and a 20”. Both blued though, stainless is a bit garish for me.
Hey,
I am a Marlin man--I've got three original JMs in 357, 44 and 45-70. The only problem is they are still in storage in the UK.....
So, to assuage my lever cravings about 6 months ago I picked up a used 44 16in Rossi for $600 off TM. The intention was to play about with it until I get my Marlins, BUT I love this little thing!
I don't know if the previous owner(s) played with the trigger but it is slick and as light as hell (yes, my trigger pull gauge is also in storage ��)
It also has a lovely Marbles 'bullseye' sight set on it.
I'm not selling this gun despite my plans at the outset now!
So, if you can find one like mine, I'd recommend it. It's one of the 'newer' Taurus made models with a few of the bolt group bits blued rather than stainless like the bulk of the gun.
Mine is a late 80's early 90's model 357 16". Awesome little jobbie.
Bought a trigger spring kit from a dude on OZ couple of months ago. It was already worn in so to speak but geez didn't they lighten everything up. Well worth it.
If it was a 44 it would be perfect.
Don't know if I like the ones with the safety on the top. Bit naff to me.
The later ones have safety on the bolt, and it's a bit naff. Would recommend an earlier one without. My 44's trigger was quite nice too, and cycled 100% reliably. Accuracy was as good as me. I wanted to lop a 20" off to 16.75" and suppress it, but needed something else in a hurry, so that got moved on. Will be getting another as soon as funds allow though, in both 357 and 44 mag
just dont use the top safety and put it on 1/2 cock
Yup, but even better with it not there to begin withQuote:
Originally Posted by gonetropo
Cheers lads.
Calibres are new to me also both much the same power wise ?
Can see theyre 100 max rounds
Between 357 and 44?Quote:
Originally Posted by llewelyn
Yea 357 and 44 @Tommy
Roughly double the energy at the muzzle from the 44mag, so yes a big difference. You can load either 'light' easily, even by using factory ammo (44 special in the 44, 38 special in the 357), just gotta be careful to clean the chamber when switching cartridges.Quote:
Originally Posted by llewelyn
There's a hell of a spread between the two. A light load in the 357/38 could be a 100gr projectile doing 1200 fps, vs a heavy in the 44sp/mag could be a 340gr doing 1500 fps. That's like comparing a funny stunted dolphin to a killer whale :thumbsup:
Mine's got the safety on the top, I don't think I noticed it for ages when I first got it! Only one time after cleaning first shit at the range failed to fire - I'd move tae safety whilst cleaning. I never use it.
If you got a model with one and it bothered you that much there's videos on YouTube on how to remove it and fill the hole with a 25ACP case :yuush:
I’d definitely recommend a pre-safety one as Tommy said. If you do get one with a safety though, Steve’s guns in the US make a bung that replaces the safety, or a rear sight that goes in it, although you’ll have to use an intermediary to get them to NZ.
Physeptone, I reckon the reason you love the Rossi after only having Marlins is because it’s a Winchester copy!
Marlins are a lot easier to fit optics to if that is what floats your boat.
But geez don't the 16" Rossi's with that nice rounded part on the bottom of the action carry well. That part fits in the hand beautifully and balances well
I had an early 1980 357 Rossi. It kept breaking ejectors, even gunsmith made ones. It could have just been a Monday morning made carbine though. The difference in smack is incomparable to any 357 revolver length barrel. With a hefty dose of powder it would hurtle a 125gr lead bullet at 2000fps and penetrate 1/4" soft steel. I'm now the owner of the 44 mag version and have never suffered separated cases, ejector problems or anything else, except a carbine with half again the wallop of the 357. A fun gun, both of them.Reloading different bullets bumps that up greatly. Buy both...Quote:
Originally Posted by llewelyn
Perhaps you could answer a question on the Marlin 336 in 3030 for me? The one I had, had a free floating trigger...the first pull of the trigger flapped helplessly to and fro and I'd never seen a gun do that before or after. Almost as if there was no spring present. A gunsmith bloke in Hawkes Bay assured me that "They all do that sir". Do they..?Quote:
Originally Posted by physeptone
I wonder if the extractor spring was giving it grief. Before I replaced mine it would throw a case meters away.Quote:
Originally Posted by outlander
Mind you not actually a massive spring but maybe enough to load up the extractor