Ruger 10/22 - Scope/sight options

I've purchased a new 10/22 with hogue stock, with full Barrel Silencer.

I was going to put an old night eater on it, but its far too big. I am wanting something compact.

What setups to you guys/girls have? Pro's & Cons?

Wanting to shooting anywhere out to 80m or so. I like the look of the Leupold FX-II Ultralight 2.5x20mm but not the price. Would consider red dots, but wouldn't know where to start?

Any help would be much appreciated.

Cheers.

still got my leupold cqb for sale. bloody nice but i would rate it at 100m scope

A chassis with adjustable stock fixes length of pull issues with factory stocks.
I’m running a Loopie 4.5-14x40 on mine.
Probably a little too much magnification. A 3.5-10 would be perfect.
Mine shoots 1” at 100m no problems if the wind is light.

Attachment 143457

I have 3.

Number One runs a super light aluminium sleeved barrel and Hogue stock. This is my hunting gun. It has a light weight 3-9x40, i actually want to change it, but the rings have been over tightened to the dovetail rail and the allen screw's head is slightly bent out of shape, which means I cannot undo the screw. until I figure it out I am stuck with this scope. 9x power is not enough for me when shooting standing and aiming for possum's head at 40m+.

Number Two runs full KIDD with heavy barrel. it is my hunting + target shooting gun. It has a 2-16x44. I really like this scope. Very clear at both end (although some distortion at 2x), heaps of room for dial, awesome zoom range and focus from 10m - infinity.

Number Three runs full KIDD with a heavy barrel, it is not threaded so I dont use it for hunting, just target shooting. It has a 5-20x50. I leave it on 20x power most of the time. It can focus from 10m to infinity.

Personally, I need the scope to be able to focus at 25m if it is used on a 10/22.

Quote:

---

Originally Posted by mimms2

Yes but you didn't get it off the shelf didya? How much did you spend above and beyond buying the original ruger?

---

Apart from the Chassis, it’s a standard Target Lite Model.
Bought off the shelf. Nothing done to it.

Factory stock.

Attachment 143460

I run a Kahles 2-7 x32 on mine,I find I need a scope equal to the one I run on my deer rifle ,I shoot the 10/22 a lot more than my deer rifle ,a rabbits kill zone is a lot smaller than a deers,if you can’t see it you can’t shoot it..also have a trs25 red dot I use for shits n giggles,a lot of fun on running bunnies and hares with the semi auto.

Quote:

---

Originally Posted by dogmatix

Apart from the Chassis, it’s a standard Target Lite Model.
Bought off the shelf. Nothing done to it.

Factory stock.

---

I wondered how those fancy off-the-shelf 10/22s shot. Sound good.

Yep, well worth spending the extra for models with a free float barrel and not the band.

Quote:

---

Originally Posted by mimms2

Check that it will even be on paper at 80. Most rugers I've met are optimistically 60yd guns, better kept within 40.

20mm is very small tube by modern standards, amd IMO would look "off".
Also with the standard stocks and actions and their shit screw-on pic rail: I'll have both scope rings forward of the turrets to get head possie/eye relief for offhand shooting, and a skinny tube is more likely to not like that.

Any 1" tube x32 scope you can find will be fine. 1-7 or 3-9. even fixed 4x

Red dots are a matter of preference and situation (night shooting? dawn/dusk? what targets? snow or forest?), plenty of threads here on them.

---

Cheers for the comments. Scope is what I am after after doing a little research on the red dots.

Will look for a 1-7 or 3-9 x 32 / 35 / 40.

Quote:

---

Originally Posted by gonetropo

still got my leupold cqb for sale. bloody nice but i would rate it at 100m scope

---

Looked up your Leupold, bit small for what I'm after. Thanks anyway.

Quote:

---

Originally Posted by Ultimitsu

I have 3.

Number One runs a super light aluminium sleeved barrel and Hogue stock. This is my hunting gun. It has a light weight 3-9x40, i actually want to change it, but the rings have been over tightened to the dovetail rail and the allen screw's head is slightly bent out of shape, which means I cannot undo the screw. until I figure it out I am stuck with this scope. 9x power is not enough for me when shooting standing and aiming for possum's head at 40m+.

Number Two runs full KIDD with heavy barrel. it is my hunting + target shooting gun. It has a 2-16x44. I really like this scope. Very clear at both end (although some distortion at 2x), heaps of room for dial, awesome zoom range and focus from 10m - infinity.

Number Three runs full KIDD with a heavy barrel, it is not threaded so I dont use it for hunting, just target shooting. It has a 5-20x50. I leave it on 20x power most of the time. It can focus from 10m to infinity.

Personally, I need the scope to be able to focus at 25m if it is used on a 10/22.

---

Don't think I can get away with ordering another two 10/22's.

9 power should be sufficient for the type of shooting I do.

Quote:

---

Originally Posted by dogmatix

A chassis with adjustable stock fixes length of pull issues with factory stocks.
I’m running a Loopie 4.5-14x40 on mine.
Probably a little too much magnification. A 3.5-10 would be perfect.
Mine shoots 1” at 100m no problems if the wind is light.

Attachment 143457

---

Thats nice, I like the Lupy, have one on one of my other rifles.

I think I need the lower mag for the shooting I intend to do.

Quote:

---

Originally Posted by dogmatix

Apart from the Chassis, it’s a standard Target Lite Model.
Bought off the shelf. Nothing done to it.

Factory stock.

Attachment 143460

---

Thats nice. 3kg+?

Quote:

---

Originally Posted by The bomb

I run a Kahles 2-7 x32 on mine,I find I need a scope equal to the one I run on my deer rifle ,I shoot the 10/22 a lot more than my deer rifle ,a rabbits kill zone is a lot smaller than a deers,if you can’t see it you can’t shoot it..also have a trs25 red dot I use for shits n giggles,a lot of fun on running bunnies and hares with the semi auto.

---

What did the Kahles set you back? I'm looking at spending $300-$400, Im guessing that would be out of my price bracket?

I run a 10/22 in a Houge stock, scope is a Burris 3-9 x 40 rimfire. It has a ballistic recticle that is set up for the 22lr. Once you have it sussed you can shoot a long way out with it.
Clear enough and still going strong after 4 years of Central Otago rabbit shooting.
Rifle is stock with a couple of little tweaks from Gundoc. Group is 6 mm at 50 mtrs shot pretty causally over a pack. All you need as a accurate workhorse rifle without spending a fortune.Attachment 143476Attachment 143477

Got a Bushnell for a $100

Put a 2MOA Aimpoint on mine to deal with pests bailed by the dog. Works a treat. So well in fact that I have left it on for all work. Shooting rabbits quite comfortably and consistently out to 70m. Trick is to adjust the dot brightness to allow for more precise shooting. Often think about putting a 3-9 back on then look at what I can do with dot and dog and then go.....nah....;)

Quote:

---

Originally Posted by Raging Bull

What did the Kahles set you back? I'm looking at spending $300-$400, Im guessing that would be out of my price bracket?

---

I have paid around $750 for my Kahles in the past,second hand as they don’t make the 2-7 anymore..worth every penny though.

Quote:

---

Originally Posted by mimms2

Check that it will even be on paper at 80. Most rugers I've met are optimistically 60yd guns, better kept within 40.

20mm is very small tube by modern standards, amd IMO would look "off".
Also with the standard stocks and actions and their shit screw-on pic rail: I'll have both scope rings forward of the turrets to get head possie/eye relief for offhand shooting, and a skinny tube is more likely to not like that.

Any 1" tube x32 scope you can find will be fine. 1-7 or 3-9. even fixed 4x

Red dots are a matter of preference and situation (night shooting? dawn/dusk? what targets? snow or forest?), plenty of threads here on them.

---

Are you referring to overall tube or front objective? Mate I really like the wee 20mm front objectives. They are short and light and really help with handling and pointing IMO. Love em. Leupold 1.5 -5x20 is one of the best. :thumbsup:

Just brought a vixen 3x12x42,dials perfect,weighs only 12.5 ozs.Nice wee scope from reloaders.

Quote:

---

Originally Posted by mimms2

Well, I'll be...
That's quite impressive.

I suppose it has the brx trigger and they've generally fettled all the other issues...

---

Yep, BRX trigger.
I weighed up getting a carbine 10/22 and then pimping it out with VQ or Kidd parts, a heavy profile tensioned barrel, target stock etc, but that worked out way more than the factory Target Lite.
So it was a no brainer getting it.

There is a new 10/22 competition laminate model out, with 2 receiver screw (front and back), but its $450 more than my model.

Quote:

---

Originally Posted by dogmatix

Yep, BRX trigger.
I weighed up getting a carbine 10/22 and then pimping it out with VQ or Kidd parts, a heavy profile tensioned barrel, target stock etc, but that worked out way more than the factory Target Lite.
So it was a no brainer getting it.

There is a new 10/22 competition laminate model out, with 2 receiver screw (front and back), but its $450 more than my model.

---

The factory Target Lite with Laminate stock sells for 1199~1299.

7 years ago, I bought a second hand stainless steel 10/22 (with a scope and a cheap can) for $300, added a $200 whistlepig barrel, a KIDD two stage trigger (worth $500) and a Hogue stock (worth $150) I had from another gun. Grand total $1150 canned and scoped, with a plastic stock and factory stainless steel barrel as spares. Things are more expensive today so one would expect to pay maybe another few hundies for my set up. But you get a KIDD two stage which has no equal.

I got mine for $1199.

I recall my build was going to be:
$600 for new 10/22
$600 for Kidd tensioned barrel
$650 for Kidd trigger

I see 55six have brownell receivers in stock that have the rear screw.

Ooops scratch that, just standard receivers!! Didn't really look properly.

Quote:

---

Originally Posted by dogmatix

I got mine for $1199.

I recall my build was going to be:
$600 for new 10/22
$600 for Kidd tensioned barrel
$650 for Kidd trigger

---

Darin at USAGUNS used to sell full KIDD with Hogue stock for about 2k. i dont know if he still does that but with Ruger factory rifle price going up so much, those full KIDD prices look pretty good.

Cheers guys, ended up buying a Vortex Crossfire 3-9 x 40 at my local. https://uploads.tapatalk-cdn.com/202...3ddae88a99.jpg

Sent from my LYA-L29 using Tapatalk

Quote:

---

Originally Posted by viper

I run a 10/22 in a Houge stock, scope is a Burris 3-9 x 40 rimfire. It has a ballistic recticle that is set up for the 22lr. Once you have it sussed you can shoot a long way out with it.
Clear enough and still going strong after 4 years of Central Otago rabbit shooting.

---

Yep, exactly this setup x 2. Works well.

Greetings All,
One thing to remember is for the best accuracy in a .22 RF you need either a dedicated .22 RF scope that is set to be parallax free at 50 to 60 metres or a scope that is adjustable for parallax. I have a Leupold 4 -12 with adjustable objective which is ideal. My Savage .22 RF has an old Lyman 8 power with adjustable objective with fine cross hairs.
Regards Grandpamac.