Thread: Ruger 10/22 - Tricks, tips and modifications

Originally Posted by bunji

,Gundoc did you use to bed them and put a crossbolt in through the rear trigger group pin?l posted elsewhere in the thread about the custom rugers we used and they were bedded and the cross bolts fitted and the front barrel band removed.

No, never bothered with bedding unless a customer specifically asked for it. I found the standard front action screw was perfectly adequate for good accuracy, and the barrel was sufficiently stiff to allow the use of the barrel band without problems. With the standard system the action is floating, and with the barrel permanently fitted they shot well.