Ruger American rebarrel options

Has anyone out there built a wildcat on a 223(.384) bolt face? I acquired a ruger American ranch sans its barrel and wantto do something with it. I was going to get the bolt face opened up to .473 and build a 358win or 375-08 but that may prove to be more hassle than it’s worth. Rather than just the Normal fast twist .223 or 300blk I’d like some other ideas. It will be a deer rifle for under 400yds. I would like to be able to run subs so the 300hamr and 350legend both have some merit, but either way I’d be interested in other peoples ideas. And no @MartyHenry I’m not going to make a 358BPE 1-1/4” bolt action 🤣

The legend just a "marketing reinvention of the Winchester 351 self loading really" would be my suggestion if you want to go fast and slow, no faffing with the bolt head, good selection of pistol bullets of reasonable weight for subsonic.
As to a BPE, You have a 50/70 that could easily be rechambered to 3 inch if you want to go there

At least I could get brass for a 50BPE 3”

223 Ackley
22 Nosler
6x45 Rem
6x45 Ackley
22-204(My 1st choice)/22 Terminator
6.5-204

These would be my suggestions.

Not on a 223 but I built a 6.5 06 on a ruger american 30 06 action tru flite did it for me.

8.6 blackout is quite good fun but not as cheap to run as a 350 legend ect

Had a quick look at the 350 Legend and the 30Hamr - I found that I researched the 350 L a while ago - potent little cartridge.

Go 350 Legend.

400m might be a little much to ask?

6 x 47 is a good round - uses the .223 full-length blank basic brass

277 Wolverine looks promising also, but I’m not sure who would have a reamer. 7mmTCU considered also(I acquired 50rnds in a bulk lot a few years back)

its not hard to get reamers I just got one recently from ptg

Quote:

---

Originally Posted by NCGNSMITH

8.6 blackout is quite good fun but not as cheap to run as a 350 legend ect

---

Would that not require a bigger bolt face than .384 could allow?

Quote:

---

Originally Posted by Preacher

Would that not require a bigger bolt face than .384 could allow?

---

Year but with the bolt handle being removable it a super easy job to open the bolt face
On them unlike other bolts that need a drive arbor ect

@blip was the cost reasonable? Was customs and issue and do I need all 3 reamers(resized, rougher and finisher)?

I thought it was. No problems with customs, its just a machine tool. Im not sure what reamers you would need I rechambered a 22 hornet to a k hornet so just used a finishing reamer. Someone with more experiance will know

Well if it’s not a big job to open the bolt face then I will make enquires to get that done instead. @blip do you want the job?

Thats beyond my skills. There are a few guys here that could probably do it or I can put you onto the guy I use if you want.

https://forum.accurateshooter.com/th...-size.3953595/
https://www.snipershide.com/shooting...-specs.216640/

seems like they may have the same thread pitch size as a remington 700 in my quick google search
might be worth spending half an hour or so reading up on it to confirm as a take off barrel would be a much cheeper option than anything else

normally a rebarrel will run you more than the buying complete new rifle so be sure you really want to go down that track before getting carried away

After talking to Jaco, I’ve decided to stick with the 223 case and have decided to build a 6x45.