Rust !!

Lads,

Just took my shotgun out of the safe. Fuck me there's a spot of rust on the barrel about the size of your thumb nail!!

Don't know how this has started. None of the other rifles in there show any. Maybe it touched something before it was stored last time. Don't know. Not happy!!!!

Anyway. How to deal with such??? I would like to get the barrel re blued if anyone knows anyone around who does such work?? It's a A303 Beretta 12 g semi auto, so it's just a single barrel with the fittings for the gas port etc.

I would like to keep it original looking if I could. Don't think ceracote is the answer. This was the first shotgun that I ever brought and it is very sentimental to me. I've shot a lot of ducks with it, possums, parries. You name it.

Anyone had any bluing done ??

Thats not too large a spot. Suggest start by scrubbing the area with a toothbrush and lots of wd40, then follow up with leather. Lets know what is left.

Number 4 steel wool will take it off without affecting the finish. Use with engine oil if you've got some.

Unless it really bad.

Cerakote comes in colours that replicate bluing so I wouldn't discount it. It would definitely give you peace of mind when using and storing the gun.

DO NOT USE STEEL ON STEEL. too abrasive. Buy soft stainless wool scourer, I get them at paknsave for bugger all, use oil as a lubricant and slowly with minimal pressure go back and forth over the rust. Wipe off the brown oil crud and have a look, if its working well then carry on. If it's not working because the rust has formed hard scales I normally take a fired brass case and use the edge to scratch at and break the rust scale, then apply a bit more oil and continue with the steel wool.

If your like me and enjoy buying rusty old milsurp then I would invest some time in boiling and carding or veeeeeeeeery careful use of electrolysis (though I am sceptical of this method long term as I think it things the blue.

Remember rust blooms on the surface for quite a while before it starts eating metal deeply and putting. Surface rust is really just part of gun ownership and easy to clean so that no one could ever tell it was there.

And for all those people who don't reoil there guns once a year or so and they sit there dry well I'd encourage you to run a clean white rag over your seemingly good blue. It will come back brown! Gun blue needs oil or it will naturally deteriorate unless in perfect environment conditions.

a thumbnail sized spot will probably be a fingerprint,sweaty fingerprints will do this everytime a coconut.... taking gun out of cabinet 3-4 days after putting it away for another quick look can be eye opening if youve been in salty enviroment...its part of my must do now after having been caught out a few times.

A few people on here a while ago recommended using the CRC long life anti rust on the outside of your rifles in the safe. I've had no exterior rust since using it. I do wipe a rag sprayed with it over the rifles every month or two though. Cheers

Attachment 220329

Quote:

---

Originally Posted by Micky Duck

a thumbnail sized spot will probably be a fingerprint,sweaty fingerprints will do this everytime a coconut.... taking gun out of cabinet 3-4 days after putting it away for another quick look can be eye opening if youve been in salty enviroment...its part of my must do now after having been caught out a few times.

---

I have what some people call "acid hands" my fingerprints are very prominent in brown should I not clean a gun correctly so I am now well versed in care and cleaning of gun blue

Quadruple zero steel wool with a lubricant should get rid of the issue.

Quote:

---

Originally Posted by bumblefoot

A few people on here a while ago recommended using the CRC long life anti rust on the outside of your rifles in the safe. I've had no exterior rust since using it. I do wipe a rag sprayed with it over the rifles every month or two though. Cheers

Attachment 220329

---

Yup all I use inside bore and outside of rifle, works great cause it doesn't run or drip like normal crc :cool:

Quote:

---

Originally Posted by dannyb

Yup all I use inside bore and outside of rifle, works great cause it doesn't run or drip like normal crc :cool:

---

Worth pointing out never use crc 556 on blued guns, There are rust removing ingredients inside and you will deteriorate the bluing of nice guns.

Sent from my SM-S906E using Tapatalk

Quote:

---

Originally Posted by BRADS

Worth pointing out never use crc 556 on blued guns, There are rust removing ingredients inside and you will deteriorate the bluing of nice guns.

Sent from my SM-S906E using Tapatalk

---

Handy to know :thumbsup:

Quote:

---

Originally Posted by muzza

I use a stainless pad called a Frontier Big 45 Cleaning pad - which to all intents and purposes is a stainless pot scrub. Spray some light oil - I use CRC cos I have it - onto the pad and gently rub on the rust spot . The pad should remove the rust but leave the blue . I have de-rusted some pretty awfull rifles this way.....

---

This is the way to go. Does exactly that, will remove the rust but not the blue or any patina there might be on an older gun. I use Ezzox with it not CRC.

+3 with the long life crc :)

I use Inox M3 which seems to work well and for long term storage MX4
never had rust to date.

https://www.inoxnz.co.nz/mx3-lubricant-2/

https://www.inoxnz.co.nz/mx4-lanox-lanolin-lubricant/

Quote:

---

Originally Posted by BRADS

Worth pointing out never use crc 556 on blued guns, There are rust removing ingredients inside and you will deteriorate the bluing of nice guns.

Sent from my SM-S906E using Tapatalk

---

interesting as used it for years..but mainly inside bore after a wet day on hill...I DO KNOW its not good if gets on scopes,possibly why I fogged up a few back in the day.