Thread: Sako Vixen screw size

Originally Posted by Frodo

Cheers man, appreciate it.

The custom screw maker only makes Allen screws. If Tikka T3 screws (in torx) fit as per what Mathias says, then I might be best going down that route.

Be aware that J&P Custom Products charge $39 USD to send two screws to NZ - no exceptions. The 6mm x 1 screw's you're after can be bought elsewhere or made yourself. Any engineering supply business should have them in hex head of various lengths. You can bevel the head and cut to length. The length of the screw section shouldn't make any difference.

Originally Posted by 10-Ring

Be aware that J&P Custom Products charge $39 USD to send two screws to NZ - no exceptions. The 6mm x 1 screw's you're after can be bought elsewhere or made yourself. Any engineering supply business should have them in hex head of various lengths. You can bevel the head and cut to length. The length of the screw section shouldn't make any difference.

Yeah, too dear. I ended up buying a couple Tikka T3 screws from Gunworks. About $20.00.

Service was good. Got them the next day or so.